Neutral Cordless Faux Wood
Product Information: Cordless Faux Wood
The Cordless Faux Wood is a type of window blind that provides
privacy and light control. It is designed to resemble real wood but
is made from synthetic materials, making it more durable and
resistant to moisture. The cordless feature ensures easy operation
and enhances child and pet safety.
Tools Needed for Installation:
- Rechargeable Drill with 1/4 Hex Bit / Phillips Screwdriver
- Pencil
- Tape Measure
Parts Included:
- Installation Brackets
- Valance Clips
- Center Support (for blinds over 37″ wide)
- End Cap for Hold-downs
- Hold-down Bracket Installation Screws
Bracket Placement:
The left and right brackets should be placed according to
whether you are installing the blind inside or outside the window
frame. If applicable, the center support bracket should also be
installed.
Valance Clips & Wand:
Attach the valance clips to the headrail, either for inside or
outside mount. Assemble the wand and slide it into the
brackets.
Finishing Up:
If applicable, install the hold-down brackets to secure the
bottom rail of the blind. Complete the installation by attaching
the valance to the headrail.
Product Usage Instructions:
Raising and Lowering the Blind:
To raise or lower the blind, simply lift or lower the bottom
rail to the desired height. The blind can be adjusted to any
position within its range.
Opening and Closing the Blind Slats:
To open or close the blind slats, turn the wand until the slats
are opened or closed to the desired amount. The wand controls the
angle of the slats, allowing you to adjust the amount of light and
privacy.
Please note that the Cordless Faux Wood blinds are custom-made
and may have a slight increase in height (+6″) for ordered sizes.
Blinds over 84″ may have additional height (+10″), which is normal
and not considered a manufacturing error or defect.
CORDLESS FAUX WOOD INSTALLATION INSTRUCTIONS
TOOLS
GETTING STARTED – TOOLS NEEDED FOR INSTALLATION
Rechargeable Drill with 1/4″ Hex Bit / Phillips Screwdriver / Pencil / Tape Measure
UNPACKING THE PARTS
Locate the parts and brackets in hardware box. The quantity will vary with blind size.
Hold-down parts will only be sent for blinds that have requested this option.
Center Support Bracket will only be sent for blinds over 37″ wide.
Installation Brackets
Valance Clips
Center Support
End Cap for Hold-downs Hold-down Bracket Installation Screws
BRACKET PLACEMENT
VALANCE CLIPS & WAND
Left Bracket
Right Bracket
Inside mount
IF APPLICABLE: Center Support Bracket
Outside mount
Attach Valance Clips
Clip on to Headrail
OR
Inside mount
Outside mount
Assemble the Wand
Slide into Brackets
Attach Wand
Snap together where applicable. Install Valance
FINISHING UP
IF APPLICABLE: OR
Hold-down brackets
6
OPERATING INSTURCTIONS
Raise or lower the blind by lifting or lowering the bottom rail to the desired height.
PLEASE NOTE: This product is made up to +6″ of ordered height. Blinds over 84″ may include up to 10″ of additional height. This is normal for this product and not considered a manufacturing error or defect.
Open or close the blind slats by turning the wand until the slats are opened or closed to the desired amount.
05/2018
Blinds | Custom Blinds and Shades Online from SelectBlinds.com
