HLOUISECHR-1FLR Louise Floor Lamp
Product Information
This product is a quality lighting fixture designed for
installation in your home or office. The model number of your
lighting can be found on the side of the packaging. Please use this
number as a reference for identifying your specific lighting.
With proper use and care, this lighting fixture is designed to
provide you with years of use. The installation instructions
provided will guide you through the process of setting up your
lighting. If you encounter any issues with your lighting, please do
not return it to the place of purchase. Instead, contact our
toll-free customer service number at 877-397-5144 for
assistance.
Before installing your lighting, we recommend reading all
instructions thoroughly. Please note that it is recommended to
consult a licensed electrical contractor for installation.
For safety purposes, please adhere to the following
warnings:
- Turn off or unplug the lamp and allow it to cool before
replacing the bulb. - Avoid touching the bulb when the fixture is turned on.
- Do not look directly at the lighted bulb.
- Keep materials that burn easily away from the lighted
bulb.
When cleaning the fixture, use only a soft cloth to dust and
clean. Avoid using chemicals or abrasive cleaners as they may
damage the finish.
Product Usage Instructions
Installation Instruction
Item No: HLOUISEGLD-1FLR HLOUISECHR-1FLR
- Carefully unpack and take out all the parts as shown in the
picture. - Insert the screw (B) through lock washer (C), iron washer (D),
marble base (E), iron sheet (F) into the steel pipe (G). Use the
wrench (A) to tighten the screw (B). - Insert the wheel (H) through the steel pipe and secure it by
inserting the screw (J) through the holes of the steel pipe into
the wheel (H). Tighten the screw with a screwdriver (K). - Screw the turn-knob (L) through the steel pipe (G) into the
wheel (H). - Place the fabric shade (P) onto the socket (O) and secure it
with the socket ring (Q).
Note: The swing turn-knob (L) is used to adjust
the arm (I) up and down, but not side to side. The swing wheel (M)
is used to adjust the arm (N) side to side, but not up and
down.
Note: This lighting fixture requires a
120V/100W bulb.
1-Year Limited Warranty
This product comes with a 1-year limited warranty provided by
Hanover Products (Manufacturer). Within one year of purchase, the
Manufacturer will repair or replace any defective components
covered under this warranty.
The consumer is responsible for sales and use taxes, as well as
shipping and handling charges associated with warranty claims.
To avail of this warranty, the original purchaser must present
their sales receipt showing the original date and location of
purchase. Replacements under this warranty are effective from the
original purchase date for future warranty claims.
This warranty covers manufacturing defects only and does not
cover normal wear and tear, abuse or misuse, water damage, chemical
damage, exposure to extreme heat or cold, or abrasion. The warranty
is void if the product is not used for its intended purpose.
The Manufacturer disclaims liability for any inconvenience
caused by a defective part or component, as well as any aspect of
installation.
Please note that certain items are not covered by this warranty,
including components subjected to abuse, damages caused by
retailers, shippers, or installation crews, and parts that exhibit
normal wear but still function as new.
Assembly & Care Guide
The model number of your lighting is printed on the side of your carton. Always use this number to identify your lighting.
Thank you for your purchase of this quality lighting. With proper use and care, your lighting will provide you with years of use. Please follow the instructions on how to install your
lighting. If you should have any problems with your lighting DO NOT return it to the place of purchase. Please call our toll free number: 877-397-5144 and a customer service representative will assist you.
Please read all instructions completely before installing your lighting. NOTE: It is recommended to contact a licensed electrical contractor for installation.
WARNING: To reduce the risk of fire, electric shock, or personal injury: – Turn off /unplug lamp and allow to cool before replacing bulb. – Do not touch bulb when fixture is turned on. – Do not look directly at lighted bulb. – Keep materials that burn easily away from lighted bulb. CLEANING: Use only soft cloth to dust and clean fixture. Never use chemicals or abrasive cleaners as it may damage finish.
Installation Instruction
Item No: HLOUISEGLD-1FLR HLOUISECHR-1FLR
1. Carefully unpack and take out the parts as picture shown. 2. Place the screw (B) through lock washer (C), iron washer (D), marble base (E), iron sheet (F) into the steel
pipe (G), then tighten the screw (B) with the wrench (A). 3. Place the wheel (H) through the steel pipe, then place the screw (J) through the holes of the steel pipe into
the wheel (H) and tighten with screwdriver (K). 4. Screw the turn-knob (L) through steel pipe (G) into the wheel (H). 5. Place the fabric shade (P) onto the socket (O), and secure with the socket ring (Q).
Note: Swing turn-knob (L) is only to adjust arm (I) up and down, not side to side. Swing wheel (M) is only to adjust arm (N) side to side, not up and down.
Note: 120V/100W
1-Year Limited Warranty
“Limited” Warranty Program
For a period of one (1) year after purchase, Hanover Products (“Manufacturer”) will either repair or replace defective components in accordance with this Limited Warranty.
Sales and use taxes, plus shipping and handling charges are the responsibility of the consumer.
This warranty is between Manufacturer and the original purchaser and is valid only when accompanied by the original purchaser’s sales receipt showing original date of purchase and location of purchase. Replacements under this warranty revert back to the date of original purchase for future warranty.
Manufacturer or its authorized dealer can accept or reject warranty claims based on its findings. This warranty applies in normal residential use only, where an issue with the product is due to a defect in material or workmanship. Manufacturer can make substitutions as required of materials, components, and sub-components of comparable value and utility. This warranty is limited to product repair or replacement (to be determined solely by Manufacturer). Warranty return is limited to only the single affected component.
This warranty covers only manufacturing defects and does not cover normal wear and tear, abuse or misuse, including: water damage, chemical damage, exposure to extreme heat or cold or abrasion. This warranty is invalid if the product is not used for intended purpose. Manufacturer disclaims liability for any aspect of installation and any inconvenience caused by a defective part of a component.
Certain items are not covered by this warranty. These include, but are not limited to the following: 1. Components subjected to abuse, including abuse intended to simulate failure. 2. Damages caused by retailer, shipper or installation crew (such as scratches, dents, tears, breaks, etc.). 3. Any part which merely exhibits normal wear yet functions essentially as new.
To make a claim, send a copy of the original sales receipt along with a brief description of the problem to the email address below. Please include your email address and daytime telephone or cell phone #. All items will be charged actual freight costs plus $15 for handling. Repairs or replacement will be made at the Manufacturer’s option.
THIS IS THE ENTIRE EXCLUSIVE EXPRESS LIMITED LIABILITY. THE MANUFACTURER NEITHER MAKES NOR IS RESPONSIBLE FOR ANY OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THOSE OF RETAILING DEALERS. THIS EXCLUSIVE REMEDY IS LIMITED TO RECEIPT OF A CREDIT IN CONNECTION WITH THE REPAIR OR REPLACEMENT OF ANY PRODUCT OR COMPONENT DEEMED TO BE DEFECTIVE UNDER THE TERMS AND CONDITIONS AS STATED IN THIS WARRANTY. NEITHER AF LIGHTING, THE PRODUCT MANUFACTURER NOR ITS AGENTS SHALL BE LIABLE IN ANY CASE FOR INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY OR NEGLIGENCE EVEN IF IT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. EXCEPT AS OTHERWISE MAY BE REQUIRED BY LAW, THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES OTHER THAN THE WARRANTY DESCRIBED HEREIN, AND ALL OTHER WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY DISCLAIMED.
Contact Warranty Services at: 1-877-397-5144 or
[email protected]
12/1/2021
products.com
