Gymax Fp10126us-sl Beverage Cooler User Manual

FP10126US-SL Beverage Cooler

Product Information

Product Usage Instructions

To Install Stainless Steel Handle:

1. Pull away the door gasket in the area where the handle is to be
   installed, as shown in Illustration #1. The gasket can be easily
   removed by hand, no tools are necessary.
2. Align the handle with the pre-installed screws on the door
   frame. Tighten the screws with a screwdriver until the handles
   secure tightly against the door frame, as shown in Illustration #2.
   Do NOT over tighten as this will cause damage to the handle
   assembly.
3. Replace the door gasket to its original position.

Note: The stainless steel handle included with this Beverage
Cooler is optional and not required for operation. If you choose
not to use the handle supplied, follow step 1 to access the
pre-installed screws and remove them. Then, place 2 decorative
plugs (NOT included) into the two holes separately. Continue to
step 3 and replace the door gasket to its original position.

Product Diagram:

Contact Us!
Do NOT return this item.

USER’S MANUAL BEVERAGE COOLER
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Before You Start
Please read all instructions carefully. Retain instructions for future reference. Separate and count all parts and hardware. Read through each step carefully and follow the proper order. We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled. Always place the product on a flat, steady and stable surface. Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.
02

TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS PRODUCT DIAGRAM Installation Instructions
Before Using Your Beverage cooler To Install Stainless Steel Handle To Install Your Beverage cooler OPERATION INSTRUCTIONS Controls Storage Shelves CARE & MAINTENANCE Cleaning Your Beverage cooler Power Failure Vacation Time Moving Your Beverage cooler Energy Saving Tips Troubleshooting Guide

4 6 7 7 7 8 9 9 10 10 11 11 11 12 12 12 12-15
03

IMPORTANT SAFETY INSTRUCTIONS
Your safety and the safety of others are very important.
This Beverage cooler complies with the applicable safety requirements and is safe for daily use. However, basic safety precautions should always be followed when using an electrical appliance, to reduce the risk of fire, electric shock, and personal injury.
DANGER
· Plug into its own individual electrical outlet with a voltage rating that matches the rating label on the cooler (115/120V AC only, 60Hz, 10A). Use receptacles that cannot be turned off by a switch or pull chain. Be sure that the plug is fully inserted into the receptacle.
· Plug into a grounded 3-prong outlet. Do not under any circumstances cut or remove the third ground prong from the power cord supplied.
· To protect against electric shock, do not immerse the Beverage cooler, plug or cord in water or other liquids.
· Never unplug the cooler by pulling the power cord. To disconnect the Beverage cooler, always grip the plug firmly and pull straight out from the wall outlet.
· Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.
· Do not connect or disconnect the electric plug when your hands are wet. Do not operate the cooler with wet hands, while standing on a wet surface or while standing in water.
· Unplug the Beverage cooler or disconnect power before cleaning or servicing. Failure to do so can result in electric shock or death.
· When moving the Beverage cooler, be careful not to roll over or damage the power cord.
· Never clean Beverage cooler parts with flammable fluids. These fumes can create a fire hazard or explosion. And do not store or use gasoline or other flammable vapor and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
· Do not attempt to repair or replace any part of your Beverage cooler unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.
· An empty Beverage cooler can be dangerous to children. Remove any latches, lids, locks, and/or doors from unused or discarded Beverage coolers to prevent child entrapment and suffocation. Never allow children to operate, play with or crawl inside this Beverage cooler.
04

WARNING
· Do not use this beverage cooler for other than its intended purpose. For indoor, household use only.
· Move this beverage cooler by 2 people. Failure to do so can result in injury.
· Place this beverage cooler in a well-ventilated area with temperatures above 15°C (60°F) and below 32°C (90°F).
· To ensure proper ventilation for your beverage cooler, the front of the cooler must be completely unobstructed.
· This beverage cooler must be installed in an area away from wind, rain, water spray or drips.
· The beverage cooler should not be located next to ovens, grills or other sources of high heat.
· Do not kink or pinch the power supply cord of beverage cooler.
· It is important for the beverage cooler to be leveled in order to work properly. You may need to make several adjustments to level it.
· This beverage cooler is designed for storing and cooling wines. Do not store perishable food or medical products inside the cooler.
· When disposing of refrigeration beverage coolers, special handling is often required. It is the consumer’s responsibility to comply with federal and local regulations when disposing of this product.
· WARNING: Risk of child entrapment and suffocation. Before you throw away this or an old cooler, remove the door. Leave the shelves in place, so that children may not easily climb inside.
FLAMMABLE REFRIGERANT GAS
DANGER – Risk of fire or explosion. Flammable refrigerant used.
DO NOT use mechanical devices to defrost refrigerator. DO NOT puncture refrigerant tubing.
DANGER – Risk of fire or explosion. Flammable refrigerant used. To be repaired only by trained service personnel. DO NOT puncture refrigerant tubing.
CAUTION – Risk of fire or explosion. Flammable refrigerant used. Consult repair manual / owner’s guide before attempting to service this product. All safety precautions must be followed.
CAUTION – Risk of fire or explosion. Dispose of property in accordance with federal or local regulations. Flammable refrigerant used.
CAUTION – Risk of fire or explosion due to puncture of refrigerant tubing. Follow handling instructions carefully. Flammable refrigerant used.
CAUTION – To prevent a child from being entrapped, keep out of reach of children and not in the vicinity of the cooler.
05

PRODUCT DIAGRAM

1

Control Panel

2

Metal Shelves

3

Front Vent

4

Leveling Legs

06

5

Top Hinge

6

Glass Door with Handle

7

Safety Child Lock

INSTALLATION INSTRUCTIONS
Before Using Your Beverage cooler
· Remove the exterior and interior packaging.
· Check to be sure you have all of the following parts:
– 3 Wired Shelves
– Stainless Steel Handle
– Instruction Manual
– 2 Extra Screws for Installing Handle
· IMPORTANT: Before connecting this Beverage cooler to a power source, let it stand upright for approximately 24 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
· Clean the interior surface with lukewarm water using a soft cloth.
· Install the handle on the left side of the door.
To Install Stainless Steel Handle
1) Pull away the door gasket in the area where the handle is to be installed, as Illustration #1. The gasket is easily removed by hand, no tools are necessary.
2) Align the handle with the pre-installed screws on the door frame. Tighten the screws with a screwdriver until the handles secure tightly against the door frame, as Illustration #2. (Do NOT over tighten as this will cause damage to the handle assembly).
3) Replace the door gasket to its original position.
Note: This Beverage cooler includes stainless steel handles that are not required to operate this Beverage cooler. If you choose not to use the handle supplied, simply follow step 1 to access the pre-installed screws and remove them and then place 2 decorative plugs (NOT included) into the two holes separately. Continue on to step 3 to replace the door gasket to its original position.

Illustration #1

Illustration #2

1

Gasket

2

Screw

3

Screw Driver

4

Handle

07

To Install Your Beverage cooler
· This Beverage cooler is designed for free standing or built-in (fully recessed) installation.
· Place your Beverage cooler on a solid and level floor that is strong enough to support it when it is fully loaded. This will ensure a vibration-free and noise-free operation. Adjust the leveling legs in and out to stabilize the cooler horizontally. If the legs are not properly adjusted, the cooler may be unstable and result in excess noise or vibration.
· Locate the Beverage cooler away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase power consumption. Extremely cold ambient temperatures may also cause the cooler to not perform properly.
· It is not advisable to install this cooler in moist areas or directly adjacent to a kitchen sink, as moisture could cause premature corrosion to the components of your new cooler.
· It is recommended you install the Beverage cooler in a place with temperatures above 60°F (15°C) and below 90°F (32°C), and humidity is under 60%. If the ambient temperature is above or below recommended temperatures, the performance of the cooler may be affected. Placing your cooler in extremely cold or hot conditions may cause interior temperatures to fluctuate, and the temperature range of 3ºC-18ºC (37ºF-64ºF) may not be reached.
· Connect the Beverage cooler to an exclusive, properly grounded, standard electrical supply (115 V AC only, 60 Hz), in accordance with the National Electrical Code and local codes and ordinances. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized products service center.
Warning: Improper use of the grounded plug can result in the risk of electric shock. If the power cord is damaged, have it replaced by an authorized service center.
· The Beverage cooler should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the Beverage cooler. This provides the best performance and also prevents overloading of house wiring circuits that could cause a fire hazard due to overheating.
· Under no circumstances should you cut or remove the third ground prong from the power cord supplied.
· Do not use an extension cord or adapter plug. However, if you must use an extension cord, it is absolutely necessary that it be a UL-listed, 3-wire grounding type Beverage cooler extension cord having a grounding type plug and outlet and that the electrical rating of the cord is 10 amperes (minimum) and 120 volts.
· Do not use a cord that shows cracks or abrasion damage along its length or at either end.
08

· If the Beverage cooler is going to be used in an area that is prone to power surges/outages, it is suggested that you use a power surge protector. The surge protector that you select must have a surge block high enough to protect the Beverage cooler it is connected to. Damages due to power surges are not considered a manufacturer covered defect.
OPERATION INSTRUCTIONS
TEMPERATURE SETTING RANGE3°C(37°F) and 18°C ( 64°F) Recommended temperature settings
Beverage: 3°C -10°C (37°F – 50°F) Sparkling Wines:5°C – 8°C (41°F – 46°F) Dry/white Wines: 9°C – 14°C (48°F – 57°F) Rose Wines 10°C – 11°C ( 50°F – 52°F) Red Wines: 15°C – 18°C (59°F – 64°F)
Controls
After plugging the Beverage cooler into a wall outlet, the cooler would turn on automatically and the LCD screen would show the temperature inside of the cooler.
After setting your desired serving temperature, allow the cooler to cool down for 3 to 4 hours before placing wine bottles in the Beverage cooler.

Press

once to turn the interior light ON or OFF.

Press

to increase or press

to decrease the temperature

in 1 degree increments between 3°C and 18°C or between 37°F

and 64°F.

Press to begin adjusting the temperature.

Press once to turn ON the cooler. Press and hold

for

about 3 seconds to turn OFF the cooler.

Switch the temperature display between Celsius and Fahrenheit.

09

Storage

Many cans and bottles may differ in size and dimensions. As such th e actual number of bottles you may be able to store may vary.

MODEL FP10126US-SL

STORAGE 100 standard cans

The standard can as below:

The stated loading capacity is based on the standard-size soda drink with 2.6″ in diameter and 4.84″ in height.
330ML
Wired Shelves
The appliance is equipped with three wired shelves. The shelves are without telescopic rails, designed with a stopper on each side of the shelf track to prevent bottles from falling. You can remove the shelf by lift up and pull it out smoothly. Before removing a Shelf from the appliance, it is necessary to remove all the bottles on the Shelf. To prevent damaging the door gasket, make sure to have the door opened fully all the way before pulling the shelves out. How to remove the shelf: Move the shelf to the position where the notch of the wired shelf is directly under the stopper and lift the shelf. Please ensure these are replaced when the shelf is put back. How to restore the shelf: Align the shelves to the STOPPER position and push them back to make sure the shelves are properly engaged. Make sure the shelves are fully engaged before loading any bottle into the cabinet.

10

CARE & MAINTENANCE
Cleaning Your Beverage cooler IMPORTANT: Always unplug the cooler before cleaning or performing maintenance. Never use harsh cleansers or scouring pads to clean any part of the cooler. · Turn off the power, unplug the Beverage cooler, and remove all items including shelves. · Wash the inside surfaces with warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water. · Wash the shelves with a mild detergent solution. · Wring excess water out of the sponge or cloth when cleaning the area near the controls, or any electrical parts. · Wash the outside cabinet with warm water and a mild liquid detergent. Rinse well and wipe dry with a clean soft cloth. Do not use steel wool or steel brush to rub the stainless steel, which will contaminate the stainless steel with steel particles and rusting may occur.
Power Failure Most power failures are corrected within a few hours and should not affect the temperature of your Beverage cooler. If the power is off for an extended period of time, proper steps should be taken to protect your contents.
11

Vacation Time
Leave the Beverage cooler operating during vacations of less than three weeks. For periods longer than this, turn the Beverage cooler off and leave the door slightly ajar to prevent odor from building inside the Beverage cooler.

Moving Your Beverage cooler
· Remove all items (bottles) from the cooler; · Securely tape down any loose items, such as shelves, inside the cooler.
· Turn the adjustable leg up to the base to avoid damage. · Tape the door shut.
· Ensure that the Beverage cooler stays securely in the upright position during transportation. Protect the outside of the Beverage cooler with a blanket or a similar item.

Energy Saving Tips
– The cooler should be located in the coolest area of the room away from heat sources or direct sunlight.
– Ensure that the cooler is adequately ventilated. Never cover air vents.
– Only open the cooler door for as long as necessary. Frequent opening of the door will affect internal temperature.

TROUBLESHOOTING GUIDE

PROBLEM

POSSIBLE CAUSE

SOLUTION

The Beverage cooler does not run.

The Beverage cooler may not be plugged in, or plug may be loose.
The Beverage cooler is turned off.

Ensure the Beverage cooler has been plugged in properly.

Press cooler.

to turn on the

House fuse blown or tripped circuit breaker.

Check/replace fuse. Reset circuit breaker.

12

The Beverage cooler is not cold enough.

External environment may require a higher setting.
The Beverage cooler has recently been disconnected for a period of time.
Prolonged or frequent door openings.

Set a colder setting. Allow several hours for the temperature to stabilize.
It takes 3-4 hours for the Beverage cooler to cool down completely.
Open the door less often.

The compressor turns on and off frequently.

The door is not closed completely.

Close the door properly.

The door gasket does not seal properly.

Check the door gasket. Clean or change gasket if necessary.

The room temperature is hotter than normal.
A large amount of contents has been added to the cooler.
Prolonged or frequent door openings.
The temperature has not been set correctly.

It’s normal for the Beverage cooler to work harder under these conditions.
A large amount of contents cause the Beverage cooler to run more until the desired temperature is reached.
Open the door less often.
Press either or to check the set temperature, and set the temperature properly.

The door is not closed completely.

Close the door properly.

The door gasket does not seal properly.

Check the door gasket. Clean or change gasket if necessary.

13

PROBLEM
The light does not work.
Vibrations.

POSSIBLE CAUSE Not plugged in.

SOLUTION Plug the cooler in.

The circuit breaker tripped or a blown fuse.

Check the breaker and/or fuses.

The light button is “OFF”.

Press

to turn the

light ON.

The cooler is not leveled.
The bottles are vibrating.
There is an object under the cooler.

Check to assure that the cooler is level.
Make sure the bottles don’t touch each others.
Remove the object under the cooler.

The cooler is not level.

Level the cooler.

The cooler seems to make too much noise.

Normal noise from the flow of the refrigerant

The rattling noise may come from the flow of the refrigerant, which is normal. As each cycle ends, you may hear gurgling sounds caused by the flow of refrigerant in your cooler. Contraction and expansion of the inside walls may cause popping and crackling noises.

14

The door will not close properly.

The cooler is not level.
The door was reversed and not properly installed.
The gasket is dirty.

Level the cooler.
Re-install the door properly.
Clean the door gasket.

Moisture build up on interior or exterior of the Beverage cooler.

The shelves are out of position.
This is normal during high humidity periods.
This is normal in high temperature environment.
Prolonged or frequent door openings.

Place the shelves properly.
Lower the room humidity.
Move the cooler to a cooler place, and avoid heat and sunlight.
Open the door less often.

The door does not seal completely.

Check door gaskets for proper seal.

Error Code: E1-E2-E3-E4E7-E8

A sensor has failed.

Contact the customer service
15