Jung Smart Home Bluetooth® Sig Mesh User Guide (+ PDF)

Contents hide

1 smart home Bluetooth® SIG Mesh

2 Product Information

3 Product Usage Instructions

3.1 Documents / Resources

3.1.1 References

smart home Bluetooth® SIG Mesh

Product Information

JUNG HOME is a smart home upgrade for every electrical
installation. It offers a digital infrastructure for both old and
new homes, allowing professional trades to provide energy-saving
solutions, increase comfort, and contribute to climate protection.
The system utilizes a mesh principle, where devices connected to
the mains network serve as transmitters and receivers, creating a
stable network that can cover the entire building.

The JUNG HOME system includes various components such as smart
sockets, system inserts and actuators for concealed installation,
covers for control and operation, wireless push-buttons with
battery operation, an app for control and monitoring, and a gateway
for voice control and more.

With JUNG HOME, professional trades can easily implement smart
scenarios that impress customers and generate additional turnover.
The system is easy to install without any special training
required.

Product Usage Instructions

1. Installation: Install the JUNG HOME system inserts as you
would with a conventional installation. These inserts are equipped
with a smart center plate that houses all the wireless
technology.

2. Commissioning: Use the smartphone app provided by JUNG to
commission the system. This process only takes a few minutes and
can be easily done following step-by-step video tutorials available
from JUNG.

3. Device Setup: Connect devices such as push-buttons and
sockets to the mains network. These devices will act as both
transmitters and receivers in the mesh network, amplifying signals
and sending commands.

4. Network Expansion: As you add more devices to the network,
the stability of the mesh network increases. Commands will jump
from one device to the next until they reach their intended
destination, even if it’s at the other end of the building.

5. Control and Monitoring: Utilize the JUNG HOME app to control
and monitor the smart home system. The app provides convenient
access to various features and settings.

6. Additional Features: If desired, integrate the JUNG HOME
gateway for voice control and more advanced functionalities.

7. Application Examples: Explore the provided application
examples to discover different ways to utilize the JUNG HOME
system, such as saving heating costs, optimizing morning routines,
and managing power consumption.

8. Customer Transfer: Once the JUNG HOME system is installed and
configured, transfer the control and monitoring capabilities to the
customer, allowing them to manage their smart home easily.

Note: The JUNG HOME system is designed to fit into standard wall
boxes, making it compatible with existing electrical
installations.

View Fullscreen

Yet another system for building automation? A reasonable question. There are, after all, mature solutions available. Generally, though, they are not frequently in use. Sometimes the technology is too complex, the planning too extensive, to push smart projects into the daily life of electricians and specialist firms. 90 percent of the installations are still installed conventionally.
As a result, JUNG is taking a new approach to the topic of digitalisation in buildings with a system that is systematically tailored to the needs of the trades. JUNG HOME is based on technology that is well-known and understood. Planning, cabling and mounting is the same as a conventional electrical installation, without devices in the distribution box or special wiring.

JUNG PRESS OFFICE · Agentur Richter Mail: [email protected] Pressinformation from 03.10.2022

Page 1 / 12

JUNG HOME: the smart home upgrade for every electrical installation
Building control with Bluetooth® SIG Mesh: JUNG HOME makes networking easier than ever. The new system smartifies every building with no server, no Internet, no hammer drill.
With this, virtually every home – whether old or new – already fulfills the requirements for a digital infrastructure. Professional trades can offer solutions without a great effort that save energy and heating costs, increase comfort and contribute to climate protection. JUNG HOME makes it easy to meet the increasing customer requests and demands of the building technology.
The advantages of the system JUNG HOME is …
From the socket with energy measurement function to the room thermostat in the JUNG HOME, all components communicate wirelessly with each other. The secure, worldwide wireless standard Bluetooth® SIG Mesh makes it possible.
In the JUNG HOME, there are no bus lines. To simplify the installation, the devices exchange information wirelessly. The Bluetooth® Mesh SIG wireless standard is used for this, which is an extension of the Bluetooth® protocol proven millions of times. As the only Bluetooth® version in building technology, it has been standardised by the official Bluetooth SIG, Inc. (Special Interest Group) a prerequisite for smooth, manufacturer-independent operation.
The mesh principle provides blanket wireless coverage: devices such as push-buttons and sockets connected to the mains network serve as both transmitters and receivers. They amplify incoming signals and send on commands. Because their radio waves interlock like the threads of a fabric (hence “mesh”), the stability of the network increases with every new node. And commands jump from one device to the next one until they reach their goal, even when this is at the other end of the building.
Thanks to automatic encryption and maintenance-free, self-organising, wireless technology, the effort shrinks to a minimum. Even wireless software updates for the devices while running are possible at any time over the mesh network. The installation of JUNG HOME can begin with a SCHUKO® socket or a push-button and can be extended as required from room to room or floor to floor.
Brilliantly simple: the smart socket

JUNG PRESS OFFICE · Agentur Richter Mail: [email protected] Pressinformation from 03.10.2022

Page 2 / 12

JUNG HOME: the smart home upgrade for every electrical installation
Building control with Bluetooth® SIG Mesh: JUNG HOME makes networking easier than ever. The new system smartifies every building with no server, no Internet, no hammer drill.
The JUNG HOME SCHUKO® socket replaces conventional socket inserts and immediately makes the power connection switchable by push-button, with the app and at the socket itself. An operating button with multicoloured backlight indicates the operating status at the same time. The internal memory for up to 16 freely programmable timer programs with astro function and automatic summer and winter time adjustment automates daily life. And if you want it even smarter: the JUNG HOME SCHUKO® socket Energy additionally measures the energy consumption for intelligent energy management, for example in the form of automatic switching to standby.
Under the plaster: system inserts and actuators
Whether touch dimmer, switch insert or blinds insert: the flush-mounted range covers all current application areas. A DALI push-button controller additionally operates luminaires with the standardised lighting interface, the room thermostat insert controls valve drives in the heating manifold or the electric underfloor heating. With the JUNG HOME switch actuator with binary inputs, among other things, external sensors can be integrated and loads up to 16 ampere switched. In this way, a conventional weather station finds its place in the system and can control the awning when it is windy or raining.
In good shape: covers for control and operation
System inserts determine the function, the JUNG HOME cover controls the load. As required, this can involve 1 or 2-gang push-buttons or an operating display for the room temperature. JUNG even offers motion detectors for mounting on the inserts and a presence detector. Every combination is immediately ready for use after putting onto the centre plate. The cover holds the wireless technology and can be taught easily using the JUNG HOME app on a smartphone as well as allocated to rooms and included in scenes.
Completely untethered: wireless push-buttons with battery operation

JUNG PRESS OFFICE · Agentur Richter Mail: [email protected] Pressinformation from 03.10.2022

Page 3 / 12

JUNG HOME: the smart home upgrade for every electrical installation
Building control with Bluetooth® SIG Mesh: JUNG HOME makes networking easier than ever. The new system smartifies every building with no server, no Internet, no hammer drill.
There isn’t a wall box everywhere you want an operating point. In these cases, the JUNG HOME push-button with battery power comes into its own. Thanks to the adhesive film, it can be positioned freely and adheres to all smooth surfaces, from wall tiles to bathroom mirrors and kitchen cabinets. Alternatively, it can extend existing control units in a multiple frame from the switch range without needing an extra installation box maximum functional scope with minimum mounting effort.
Everything under control: the app from JUNG HOME
It is the core of the system. The JUNG HOME app for Android and iOS is available in the app stores for Google and Apple as a free download. In only three steps, installers can set up the smart home with it: they activate pairing mode on the product with the press of a button and let the app search for new Bluetooth® devices. Afterwards, the program helps in configuring the devices, rooms and scenes. On the screen, the installer allocates the tasks to the push-buttons. At the end, they only have to transfer the project wirelessly to the customers’ smartphones and it is finished.
For voice control and more: the JUNG HOME gateway
In order to connect the encrypted, local, wireless network of JUNG HOME to the outside world, there is the JUNG HOME gateway. It is certified by the VDE Institute and has been awarded the “Smart Home Information Security Tested” seal. The gateway establishes the contact between the local Bluetooth® SIG Mesh and the secure JUNG Cloud. Cloud-based Internet services such as Amazon Alexa or Google Home can communicate with the devices in the JUNG HOME in this way. From 2023, a connection with Samsung SmartThings will also be possible. The integration with the WORKS WITH mediola® manufacturer network enables users to also link numerous IoT-compatible products with their home and, for example, to control them using JUNG HOME push-buttons.

Application examples: JUNG HOME in practice
JUNG PRESS OFFICE · Agentur Richter Mail: [email protected] Pressinformation from 03.10.2022

Page 4 / 12

With JUNG HOME, professional trades can implement smart scenarios with no effort that will impress their customers and generate added value. This pays back in additional turnover.

Save heating costs

The dominant theme: with rising energy prices, the motivation to save is increasing. The JUNG HOME room thermostat display gives precise control of the heating. Individual timer programs can be specified for each room, and interrupted if necessary with the app or on the wall display itself. One movement is enough to activate the preset economy temperature. A good argument for retrofitting in existing buildings, as in older buildings every degree reduction in room temperature reduces the requirement for heating energy particularly significantly.

Good morning in the bathroom

A nicely heated bathroom that receives the residents with bright, friendly lighting after they get up who doesn’t want that? The programmable heating control of JUNG HOME and motion detectors with astro function provide heat and light precisely when they are needed. The rest of the time, the bathroom simply stays cooler to save energy, or the lamps go on dimmed for example in the middle of the night when a bright light would dazzle the eyes.

Outfox the stand-by culprits

They are still among us – the inefficient electrical devices with high stand-by consumption. The JUNG HOME SCHUKO® socket Energy doesn’t just get wise to them, it also helps with the solution to the problem: thanks to the energy measurement function, it can detect when the consumption sinks below a preset threshold value when the device is switched off or standby mode begins. The socket switches itself off independently and disconnects the stand-by culprit from the mains.

Is the iron switched off?

JUNG PRESS OFFICE · Agentur Richter Mail: [email protected] Pressinformation from 03.10.2022

Page 5 / 12

JUNG HOME: the smart home upgrade for every electrical installation
Building control with Bluetooth® SIG Mesh: JUNG HOME makes networking easier than ever. The new system smartifies every building with no server, no Internet, no hammer drill.
Never mutter again about whether electrical loads at home have really been switched off: a push-button from JUNG HOME only activates the socket for a specified time. After 30 or 60 minutes it switches off on its own until the next button press. The JUNG HOME app also shows the current operating state on the smartphone. In this way, it is possible to check comfortably from the sofa whether everything is in order. Very practical when the ironing area is in the cellar, for example, or on a different floor.
Oh you joyful!
Christmas is definitely coming, and with it the electric Christmas tree lights. Thanks to JUNG HOME, the chain of lights provides an atmosphere fully automatically: two settings in the app are enough to ensure the JUNG HOME SCHUKO® socket switches on automatically at dusk and switches it off again at the normal bedtime. For even more control, the electrician can install a wireless push-button as an additional control unit. In this way, the chain of lights reacts like other switchable lamps in the room and can even become part of a Christmas lighting scene.
Operating convenience at the bed
Central switches at the bed are standard in luxury hotels. JUNG HOME brings this convenience home to the bedroom. System push-buttons can switch off the light in the entire home when going to bed. During the night, they serve as panic buttons that activate emergency lighting and open blinds on the evacuation routes. In turn, in the morning they activate a scenario that adjusts the light, shading and heating to the day. As JUNG HOME uses the existing wiring, there is no need for structural alterations, and battery-powered pushbuttons can be installed everywhere. That makes the customer happy.
Goodbye

JUNG PRESS OFFICE · Agentur Richter Mail: [email protected] Pressinformation from 03.10.2022

Page 6 / 12

JUNG HOME: the smart home upgrade for every electrical installation
Building control with Bluetooth® SIG Mesh: JUNG HOME makes networking easier than ever. The new system smartifies every building with no server, no Internet, no hammer drill.
Lighting off, turn down the heating, close the shutters to the garden and switch off all SCHUKO® sockets or devices that are not needed during your absence: in JUNG HOME, a single press of a button does all of this. The central 1-way switch positioned inside next to the front door gives residents the security of not having forgotten anything. For specialist firms it provides the possibility to demonstrate the advantages of smart living with a concrete example across all rooms.

Questions and answers: FAQs on JUNG HOME
Any questions? Here you can find everything that specialist firms need to know about the new JUNG system packaged together at a glance.
What is the time needed and do I require special training?
The planning and mounting are no different to a conventional installation. As a result, no particular qualification or training is needed. The system inserts from JUNG HOME are installed as normal and provided with a smart centre plate where all the wireless technology can be found. Commissioning using the smartphone app only takes a few minutes. Video tutorials from JUNG show the process step by step.
Do the system inserts fit into standard wall boxes?
With the exception of the JUNG HOME SCHUKO® sockets, all products fit into a standard wall box. The sockets have a large installation depth of 45 millimetres and need deep wall boxes. However, JUNG provides installation frames with an adapter ring as an accessory that increases the space from the socket housing to the back of the box. This allows the smart sockets to also fit into an existing, flat wall box.
How does the transfer to the customer work?

JUNG PRESS OFFICE · Agentur Richter Mail: [email protected] Pressinformation from 03.10.2022

Page 7 / 12

JUNG HOME: the smart home upgrade for every electrical installation
Building control with Bluetooth® SIG Mesh: JUNG HOME makes networking easier than ever. The new system smartifies every building with no server, no Internet, no hammer drill.
The JUNG HOME app with which the installer puts the system into operation saves all project data on the smartphone. The project file can be exported and transferred to the customer. As soon as the customer opens the project on their phone also with the JUNG HOME app they can access the devices and operate their home. There are various possibilities for transferring the file: a messaging service such as WhatsApp or Signal, as well as e-mail or a cloud storage service (Dropbox, OneDrive). The specialist firm can also export the project file to their own PC and save it there as a backup copy in case the original configuration needs to be reinstated at a later time.
Why does JUNG use Bluetooth® and no other wireless standard?
Compared to other wireless protocols, such as EnOcean, Z-Wave and Zigbee, Bluetooth® has a decisive advantage: every modern smartphone uses the standard. Specialist firms can immediately begin with the configuration without previously installing a wireless system or having IP knowledge. There is also no need for a WLAN router for the installation, which allows working in incomplete buildings before even the tenants or owners have moved in. In addition, there are also the automatic encryption and self-organising mesh network, which make networking as reliable as it is easy.
Why did JUNG decide on Bluetooth® SIG Mesh?
Bluetooth® wireless has been used in building technology for a long time. Some providers have developed their own solutions that are manufacturer-specific. That means they only work within their own product family. Devices from other brands cannot be integrated. That is different with Bluetooth® SIG Mesh. The standard-setting Special Interest Group (SIG) ensures adherence to the standard. Furthermore, the protocol has already proved its stability: there are professional installations in commercial buildings and multi-storey car parks with hundreds of devices that work absolutely reliably.
Is JUNG HOME compatible with other Bluetooth® products?

JUNG PRESS OFFICE · Agentur Richter Mail: [email protected] Pressinformation from 03.10.2022

Page 8 / 12

Purely technically, all sensors and actuators come into question that use the Bluetooth® SIG Mesh standard of the Special Interest Group (SIG). Commissioning is, however, only possible when the devices are added to the JUNG HOME app. In practice, JUNG tests from case to case whether the exchange works reliably, and only then releases third-party products for the app.

What is the radio range of the system?

The range of the entire mesh network depends on how many devices are installed and where they are installed. Thick walls and steel reinforcements can reduce the range as with all wireless solutions. In good conditions, distances of 30 metres between two participants are possible. If a more distant device cannot be reached, it is sufficient to install a JUNG HOME socket or a different device from the system connected to the electrical installation.

What happens with eNet SMART HOME now there is JUNG HOME?

JUNG eNet SMART HOME will continue to be produced. There is a large number of active systems and many installers who like to work with it. Due to its self-explanatory technology and simple configuration, JUNG HOME could open up new markets and enlarge the base for smart-home installations in general.

What are the differences to KNX?

JUNG HOME and KNX are difficult to compare. As the international standard for building automation, KNX offers many more possibilities. With the KNX range from JUNG and other manufacturers, experts can implement smart-building projects of almost any size and complexity. However, the installation of bus lines and parameterisation of the KNX devices demands significantly more time and requires special skills. JUNG HOME puts specialist trades in the position to fulfil customer requirements significantly more quickly, more easily and at an attractive price.

Is JUNG HOME compatible with the coming smart-home standard Matter?

JUNG PRESS OFFICE · Agentur Richter Mail: [email protected] Pressinformation from 03.10.2022

Page 9 / 12

JUNG HOME: the smart home upgrade for every electrical installation
Building control with Bluetooth® SIG Mesh: JUNG HOME makes networking easier than ever. The new system smartifies every building with no server, no Internet, no hammer drill.
The Matter standard is currently still in development, which is why it is too early to make an announcement. Due to the potential significance for end customers, JUNG is observing this topic carefully and will provide a solution if there is a demand for it that makes JUNG HOME compatible with Matter systems in the homes of the users.

JUNG PRESS OFFICE · Agentur Richter Mail: [email protected] Pressinformation from 03.10.2022

Page 10 / 12

Statt Smart Home kompliziert zu denken, lieber einfach smart machen. 90 Prozent der Installationen bei Neubau und Sanierung werden konventionell durchgeführt. JUNG HOME ist……

Von 230 Volt auf Smart in 5 Minuten: JUNG HOME basiert auf der konventionellen 230-Volt-Installation und wird wie gewohnt installiert. Nachdem die smarten Steckdosen montiert sind,…

Für ein smartes Zuhause genügt ein Schraubendreher und ein Smartphone. Die JUNG HOME App bietet den direkten Zugriff auf alle Geräte. Ganz ohne Internet, WLAN-Router oder Server…….

JUNG HOME SCHUKO® Steckdosen gibt es in zwei Varianten. Beide sind schaltbar: über die JUNG HOME Taster, die App oder an der Steckdose selbst. Außerdem sind frei…

JUNG PRESS OFFICE · Agentur Richter Mail: [email protected] Pressinformation from 03.10.2022

Page 11 / 12

Das JUNG HOME Raumthermostat-Display im Programm LS 990 in Alpinweiß. Je nach verwendetem Systemeinsatz steuert JUNG HOME sowohl wassergeführte Fußbodenheizungen,…

Im JUNG HOME System steuern smarte Taster alle Funktionen. Sie sind in den bekannten Serien A, CD, LS und in den Farben von Les Couleurs® Le Corbusier erhältlich und integrieren sich……

JUNG HOME auf einen Blick: Licht, Schatten, Temperatur: JUNG HOME besteht im Kern aus Systemeinsätzen, Aufsätzen und Steckdosen. Lokal vernetzt über Bluetooth Mesh.

JUNG PRESS OFFICE · Agentur Richter Mail: [email protected] Pressinformation from 03.10.2022

Page 12 / 12