Blaux Rechargeable Motion Sensor Lights

The Blaux Rechargeable Motion Sensor Lights are designed to
provide efficient lighting in entryways, rooms, and exterior areas.
These lights use built-in detectors and LEDs to illuminate the
surroundings. The product is easy to use and can run up to 11 hours
on a single charge.

Product Usage Instructions

Charge the Lights: To charge the Blaux Motion Sensor Lights,
use the included Micro USB cable. When plugged in, a red LED will
glow. The lights will be able to run for up to 11 hours on a single
charge. When the lights are done charging, the LED will turn
green.
Attach Magnetic Tape: Attach the magnetic tape onto the desired
surface (e.g., near a doorway, inside your garage, along your
exterior walls).
Attach the Lights: Attach the Blaux Motion Sensor Lights to the
magnetic tape.
Automatic Turn On: The lights will automatically turn on when
movement is detected within a 10-26 foot range. They will switch
off 15 seconds after you leave the room or when no movement is
detected.
Dark Environment: Note that the lights will only work if the
area is dark. If there is another light source, the Blaux Motion
Sensor Lights will not switch on, even if movement is
detected.
Avoid Damp Conditions: Do NOT expose your Blaux Motion Sensor
Lights to overly damp conditions (i.e., bathrooms) or immerse in
water.

Thank you for choosing Blaux! For any further queries or
assistance, you can contact our helpful customer service team by
going to support.blauxstore.com or by scanning the QR code provided
in the user manual.

View Fullscreen

USER MANUAL

Now, you and your loved ones can easily navigate your home and conserve energy.
Kindly read this user manual carefully before using your new Motion Sensor Lights. Make sure
to keep this document for future reference.
The Blaux Rechargeable Motion Sensor Lights use built-in detectors and LEDs to effectively illuminate entryways, rooms, and even exterior areas. These lights can run for up to 11 hours on a single charge, giving you maximum efficiency.

· Detection Distance: 10 to 26 feet (3 to 8 meters) · Detection Angle: 120° · Number of LED Beads: 10 · LED Life: More than 80,000 hours · LED Brightness: 1800 – 2000 MCD/piece · Luminous Angle: 120° · LED Color: Warm white · Standby Current: 39 mA · Operating Current: 70 mA · Power Supply: 350 mAh lithium battery · Auto Shutoff Time: 15 seconds · Product Size: 188 x 30 x 15 mm · Storage Temperature: 14 – 104 °F (10 – 40 °C)

1. To charge your Motion Sensor Lights, simply use the included Micro USB cable. Your lights will be able to run for up to 11 hours on a single charge.
2. Attach the magnetic tape onto the desired surface (e.g. near a doorway, inside your garage, along your exterior walls). Then, attach the Blaux Motion Sensor Lights to the magnetic tape.
3. The lights will automatically turn on when movement is detected within a 10-26 foot range. They will switch off 15 seconds after you leave the room or when no movement is detected.
Note: The lights will only work if the area is dark. If there is another light source, the Blaux Motion Sensor Lights will not switch on, even if movement is detected.

1 x Blaux Motion Sensor Light 1x Micro USB Cable 1x Magnetic sticker 1 x User Manual
1. When plugged in, a red LED will glow. When your lights are done charging, the LED will turn green.
2. Do NOT expose the lights to extreme temperatures (below 14 °F or above 104 °F).
3. Do NOT expose your Blaux Motion Sensor Lights to overly damp conditions (ie. bathrooms) or immerse in water.

Thank you for choosing Blaux!
Have questions about our products? You can contact our helpful customer service team by going to support.blauxstore.com or by scanning the QR code below. We’re always happy to help!