Lavor Thermic4000 Cold Water Petrol Pressure Washer Instructions

THERMIC4000 Cold Water Petrol Pressure Washer

Product Information

Cold Water Petrol Pressure Washer – THERMIC4000

The THERMIC4000 is a cold water petrol pressure washer designed
for heavy-duty cleaning tasks. It is manufactured by Lavorwash
Australia Pty Ltd. and is equipped with the following features:

• Max Operating Pressure: [Code]
• Maximum Water Volume: [Code]
• Motor Specifications: [Code]
• Pump Type/RPM: [Code]
• Max. Water Inlet Temperature: [Code]
• Dimension/Weight: 90x75x70cm / 75 Kg

For more information about the product, please visit the
official website of Lavorwash Australia Pty Ltd. at www.lavorwash.com.au. You can
also reach out to their sales team via email at
[email protected] or contact them by phone at 13 000 LAVOR
(52867). The company has offices in the following locations:

• VIC: 6/76 Rushdale Street, Knoxfield. VIC. 3180
• QLD: 1/26 Rowland Street, Slacks Creek. QLD. 4127
• WA: 1/37 Harlond Ave, Malaga. WA. 6090

Product Usage Instructions

To use the THERMIC4000 cold water petrol pressure washer, please
follow these steps:

1. Ensure that you have read and understood the user manual
   provided with the product.
2. Check that the pressure washer is placed on a stable and level
   surface.
3. Fill the fuel tank with the appropriate gasoline according to
   the manufacturer’s recommendations.
4. Connect the water supply hose to a suitable water source with
   an adequate water flow.
5. Connect the high-pressure hose to the pressure washer’s outlet
   and the spray gun.
6. Engage the choke and pull the starter cord to start the
   engine.
7. Allow the engine to warm up for a few minutes before releasing
   the choke.
8. Adjust the pressure settings according to your cleaning
   requirements using the control panel.
9. Point the spray gun towards the cleaning area and squeeze the
   trigger to start spraying.
10. Move the spray gun in a back-and-forth motion to clean the
    surface thoroughly.
11. After use, turn off the engine and disconnect the water supply
    and high-pressure hoses.
12. Properly store the pressure washer in a dry and secure
    location.

For detailed instructions on maintenance, safety precautions,
and troubleshooting, please refer to the user manual provided with
the product.

Cold Water Petrol Pressure Washer

THERMIC4000

Standard equipment:
· 0.999.4001 Industrial Gun

· 0.999.4002 Industrial Steel Spray Lance · 0.999.0117 15M Steel Braided HP Hose

· 0.999.1002 QR Nozzles

Optional:
· 0.999.0140 Turbo Head

Equipped with: · Honda GX390 Unleaded Motor with 3 Year Warranty · Heavy Duty Italian Linear Pump with Brass Head · Adjustable Pressure Unloading Valve · By-Pass Thermal Dump Valve · Low Pressure Detergent Pickup · Steel Trolley · Non-Marking High Pressure Hose 15m (Grey) · Wide (25cm) Pneumatic Tyres

· 0.100.0006 20″ Whirl-A-Way * More Options Available

Code Max Operating Pressure Maximum Water Volume Motor Specifications Pump Type/RPM Max. Water Inlet Temperature
Dimension/Weight

THERMIC4000 8.601.0021 4000 PSI 15 Litres/Minute, 900 Litres/Hour 13HP Honda Unleaded Petrol – 4 Stroke Crankshaft / 3400 40 °C
90x75x70cm/75 Kg

16

Lavorwash Australia Pty Ltd. Website: www.lavorwash.com.au

Email: [email protected]

VIC: 6/76 Rushdale Street, Knoxfield. VIC. 3180

QLD: 1/26 Rowland Street, Slacks Creek. QLD. 4127

Phone: 13 000 LAVOR (52867) WA: 1/37 Harlond Ave, Malaga. WA. 6090

References

• Lavorwash Australia | Pressure Cleaners | Diesel Heaters | Scrubbers