2028-B-B01 Vocal Condenser Microphone
Product Information:
The 2028 Vocal Microphone is a professional stage microphone
designed for live performances. It offers extraordinary natural
sound, high separation from nearby sound sources, and very high SPL
(Sound Pressure Level) handling. The mic features exceptionally
controlled directional quality, superb definition, and true
dynamics.
Grid and Windscreen:
The 2028 Vocal Microphone has a 3-step pop protection grid
incorporated, which effectively removes unwanted pop noise.
However, when used outdoors or with artists that create pronounced
wind or pop sounds, it may be necessary to add an additional
external windscreen. The grid consists of two parts: the outer
black metal mesh and an inner foam windscreen. Both parts may be
cleaned separately.
To clean the grid properly without damaging the capsule, unscrew
it from the microphone body. It’s important to note that the mic
capsule itself should not be cleaned in any way, as it will affect
performance. Once the mic grid is separated from the body, the
inner pop filter becomes visible. Gently unscrew it, being careful
not to touch the mesh.
Product Usage Instructions:
Cleaning the Grid:
- Unscrew the grid from the microphone body.
- Clean the outer black metal mesh and inner foam windscreen
separately using appropriate cleaning methods.
Using an External Windscreen:
If you are using the 2028 Vocal Microphone outdoors or with
artists that create pronounced wind or pop sounds, it is
recommended to add an additional external windscreen for better
protection against wind noise and pops.
Product Specifications:
- Connector: XLR-3M
- Pin Configuration: Pin 1 (shield), Pin 2 (signal + phase), Pin
3 (- phase) - Maximum Output: 9 Vrms; 19 dBV; 28 dBu
- Polarity: +V at pin 2 for positive sound pressure
- Dimensions:
- Weight: 286 g (10.1 oz)
- Microphone Diameter: 48 mm (1.9 in)
- Capsule Diameter: 19 mm (0.75 in)
- Microphone Length: 188 mm (7.4 in)
Frequency Response:
The typical on-axis frequency response of the 2028 Vocal
Microphone is measured at 12 cm (4.7 in).
Service & Repair:
If you are not satisfied with the characteristics exhibited by
this product, please visit dpamicrophones.com/service for
instructions.
Warranty:
The 2028 Vocal Microphone is covered by a two-year limited
warranty.
Contact Information:
DPI 2028-M
Head Office:
- DPA Microphones A/S
- Gydevang 42-44 DK-3450 Alleroed
- Denmark
- Tel: +45 4814 2828
- Email: [email protected]
US Sales Office:
- DPA Microphones, Inc.
- 1500 Kansas Avenue, Unit 3A
- Longmont, CO 80501
- USA
- Tel: +1 303-485-1025
APAC Sales Office:
- DPA Microphones Ltd.
- Unit 2402A, 24/F BEA Harbour View Centre
- 56 Gloucester Road, Wanchai
- Hong Kong
- Tel: +852 2617 9990
- Email: [email protected],
[email protected]
UK Sales Office:
- Sound Network
- Unit 430 Highgate Studios, 53-79 Highgate Road
- London NW5 1TL
- United Kingdom
- Tel: +44 20(0) 3008 7530
- Email: [email protected]
German Sales Office:
- DPA Microphones Germany GmbH
- Germany
- Tel: +496980883101
- Email: [email protected]
For more information, please visit dpamicrophones.com/2028
2028 Vocal Microphone
User’s Manual
dpamicrophones.com/2028
Application and use The 2028 Vocal Microphone is a professional stage mic with extraordinary natural sound, high separation from nearby sound sources and very high SPL handling.
The mic features exceptionally controlled directional quality. This, combined with superb definition and true dynamics, makes the 2028 the perfect match for all types of live performances.
Grid and windscreen The 2028 has a very effective 3-step pop protection grid incorporated, which removes unwanted pop noise. When used outdoors or with artists that create pronounced wind or pop sounds, it may be necessary to add an additional external windscreen.
Phantom power (For wired version) The 2028 is designed to apply its full specifications at the standard +48 volt phantom power (± 4 V) but will work at lower supply voltages with reduced specifications.
Cleaning Keep the microphone dry away from water and cleaning fluids. Do not use sprays or fluids containing chemicals that could remove static electricity on or near the microphone. This could cause permanent damage.
To clean the grid properly, without risk of causing damage to the capsule, you have to unscrew it from the microphone body. Be aware that the mic capsule itself should not be cleaned in any way, as it will influence the performance.
The grid consists of two parts: the outer black metal mesh and an inner foam windscreen. Both parts may be cleaned separately.
Once you have separated the mic grid from the body, the inner pop filter becomes visible. Gently unscrew it being careful not to touch the mesh.
All the parts should be assembled again in the opposite order. Be careful to align the foam windscreen in the outer black metal mesh and reposition the inner pop filter on the thread. When remounting, take care to tighten the grid firmly, which secures the inner pop filter properly. Accessories included DUA0415 Clip for 2028 Vocal Microphone Replacement parts DUA0410B Grid including outer black metal mesh and
inner foam windscreen DUA0411 Inner Cylindrical Pop Filter
Available models:
2028-B-B01 2028 Supercardioid Vocal Mic, Wired DPA Handle, Black 2028-B-SL1 2028 Supercardioid Vocal Mic, SL1 Adapter (Shure/Sony/Lectrosonics), Black 2028-B-SE2 2028 Supercardioid Vocal Mic, SE2 Adapter (Sennheiser 2000/6000/9000/evolution/D1), Black
Proximity effect The 2028 Vocal Microphone is designed as a handheld vocal mic. The frequency response is tuned to match this application. At short distances, all directional microphones will create a bass-level boost at extended distances, there will be a long-distance low cut. This phenomenon is known as proximity effect or close-talk. This gives a deeper/warmer vocal sound at short distances and more thinsounding vocals as the distance increases.
Frequency
So keep in mind that the low-frequency level will change according to the distance the mic is to the mouth. The mic has been designed and factory fine-tuned for this. The 2028 is intended to be flat at 12 cm (4.7 in). Miking and recording voice When using a mic, it is important to know some of the parameters characterizing the source you are amplifying/recording, its surroundings and the characteristics of the tools you are using. For tips and background info on voice miking, please visit: dpamicrophones.com/micuni
Level
2028 Vocal Microphone Specifications
(Measured with wired DPA Handle)
Directional pattern Supercardioid Principle of operation Pressure gradient Cartridge type Pre-polarized condenser Frequency range 20 Hz – 20 kHz Frequency range, ±2 dB, at 12 cm (4.7 in) 100 Hz – 16 kHz. Permanent 3rd order low-cut filter at 80 Hz Sensitivity, nominal, ±3 dB at 1 kHz 5 mV/Pa; -46 dB re. 1 V/Pa 5 mV/Pa; -54 dB re. 1 V/Pa with Adapter for wireless Equivalent noise level, A-weighted Typ. 22 dB(A) re. 20 µPa (max. 23 dB(A)) Total harmonic distortion (THD) < 1% up to 139 dB SPL peak Dynamic range Typ. 117 dB Max. SPL, peak before clipping 160 dB Output impedance 150 Minimum load impedance 1 k Cable drive capability 100 m (328 ft) Output balance principle Impedance balancing with Active Drive Common mode rejection ratio (CMRR) > 50 dB at 1 kHz Power supply (for full specifications) 48 V Phantom power (±4 V) Current consumption Max 2.5 mA
Connector XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: – phase Maximum output 9 Vrms; 19 dBV; 28 dBu Polarity +V at pin 2 for positive sound pressure Dimensions Weight: 286 g (10.1 oz) Microphone diameter: 48 mm (1.9 in) Capsule diameter: 19 mm (0.75 in) Microphone length: 188 mm (7.4 in)
Frequency response
Typical on-axis frequency response of 2028 Vocal Microphone measured at 12 cm (4.7 in). Polar pattern
Service & repair If you are not satisfied with the characteristics exhibited by this product, please go to dpamicrophones.com/service for instructions. Warranty The 2028 Vocal Microphone is covered by a two-year limited warranty. CE marking This product conforms with all relevant directives approved by the European Commission.
DPI 2028-M
Head Office DPA Microphones A/S
Gydevang 42-44 DK-3450 Alleroed
Denmark
Tel +45 4814 2828
[email protected]
US Sales Office DPA Microphones, Inc. 1500 Kansas Avenue, Unit 3A Longmont, CO 80501
USA
Tel +1 303-485-1025
APAC Sales Office DPA Microphones Ltd.
Unit 2402A, 24/F BEA Harbour View Centre 56 Gloucester Road, Wanchai
Hong Kong Tel: +852 2617 9990
[email protected] [email protected]
UK Sales Office Sound Network Unit 430 Highgate Studios, 53-79 Highgate Road London NW5 1TL United Kingdom Tel. +44 20(0) 3008 7530
[email protected]
German Sales Office DPA Microphones Germany GmbH
Grüneburgweg 58-62 60322 Frankfurt am Main
Germany
Tel. +496980883101
[email protected]
dpamicrophones.com/2028
Warranty
