Solar Lighting Direct Sldgs0053-ww Residential Garden Spot Light Instructions

Solar Lighting DIRECT SLDGS0053-WW Residential Garden Spot Light Instructions

PACKAGING CONTENTS

• 1 x Light Fitting
• 1 x Mounting Spike
• 1 x Pack of Screws

FEATURES

1. Day/Night Sensor
2. High/Low Brightness Setting
3. 8 hours Operation per day
4. Spike or Surface-Mount Option
5. Adjustable Solar Panel
6. Colour –Black

INSTALLATION METHOD

1. Remove contents from packaging
2. Locate the “ON/OFF” power button on the back of your solar panel
3. Press the “ON/OFF” button once, the light will be set at “LOW” level (Dim). Press the button again and the light will be at “HIGH” level (Bright). Press the button a third time and your light will be “OFF”

( Note, your light is packaged & transported with the power button in the “OFF” position).

Spike Mount Installation

Please refer to FIGURE 1 for the below steps

1. Attach mounting spike to the bottom of your light fitting
2. To assure the panel is receiving maximum sun exposure, adjust the solar panel using the swivel head to face direct sunlight
3. Spike your garden light into soil or grass and it is ready for use

IMPORTANT NOTES 

• Please ensure you place your solar panel in a location where it can achieve a minimum of 6HRS DIRECT SUNLIGHT
• If you wish for longer illumination throughout the night, switch the light to “LOW” mode
• Be aware that on overcast/cloudy days, the solar panel will still charge. However, not as efficiently as a sunny day, so the battery may not reach full capacity. Therefore, your light may turn off earlier than specified.
• It’s best not to install these lights underneath a street light, porch light etc. because this may stop the automatic daynight sensor triggering and result in your lights not turning on.

TROUBLE SHOOTING

Customer Service Number: 1300 135 911 www.solarlightingdirect.com.au

References

• Solar Lighting Direct - Australia's Premium Solar Powered LED Lighting