Crystorama Ken-8306-bf Kendal Six Light Pendant In Black Forged Instruction Manual

KEN-8306-BF Kendal Six Light Pendant in Black Forged

Product Information:

The Crystorama KEN-8306-BF is a lighting fixture that has been
providing illumination for sixty years. It features a metal frame
with five glass panels and a glass diffuser. The fixture is damp
rated and requires six medium base bulbs with a recommended wattage
of 60 watts (maximum of 100 watts). LED bulbs are recommended for
extended use.

Product Usage Instructions:

1. Slide the glass diffuser onto the bottom of the metal frame and
   secure it with clips.
2. Slide the glass panels inside the metal frame and secure them
   with clips.
3. Slip the center rod assembly along the wire and thread it onto
   the nipple located on the top of the light cluster.
4. Insert the hanging rod into the side holes of the top box on
   the center rod, and secure the hanging rod from the top with
   screws.
5. Put the top metal ring over the metal frame. Line up the hole
   on the bottom of the hanging rod with the hole on the top metal
   ring and the bracket on the metal frame, and secure it with
   screws.
6. Separate the mounting plate from the canopy kit by removing the
   screws.
7. Install the mounting plate to the outlet box using two outlet
   box screws.
8. Determine the preferred hanging height and adjust the required
   rods.
9. Feed the wires through the rods and connect them together.
10. Slip the canopy kit along the wire and thread it into the top
    of the rod assembly.
11. Install the canopy onto the mounting plate and secure it with
    the mounting screws.
12. Install the bulb (not included) into the socket.

Note: All electrical components must be installed by a licensed
electrician in accordance with the National Electric Code and the
appropriate local electrical codes. This product is also known to
contain Lead, which is known to the state of California to cause
cancer and/or birth defects or reproductive harm.

CRYST RAMA
LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL#KEN-8306-BF

Crystorama.com

COUPLER SCREW

ROD

LIGHT CLUSTER

CENTER ROD

HANGING ROD

WARNING:
Electrical Danger Turn Power off All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.

ROD 1 ROD 2

SOCKET

TOP METAL RING
GLASS PANEL (5PCS)

GLASS DIFFUSER

5-7/8”

CLIP

BRACKET CLIP SCREWS
METAL FRAME

1”

ROD 1= ROD 2=

1Pc
6″ 3Pcs
12″

65”

You will need 6-Medium Base Bulb
60 Watts Recommended 100 Watts Max.
USE LED BULBS FOR EXTENDED USE This fixture is Damp rated
How to install
1.Slide the glass diffuser onto the bottom of metal frame and secure it with clips.
2.Slide the glass panels inside the metal frame and secure it with clips.
3.Slip the center rod assembly along wire and thread onto the nipple located on the top of the light cluster.
4.Insert the hanging rod into the side holes of top box on the center rod, and secure the hanging rod from the top with the screws.
5.Put the top metal ring over the metal frame. Line up the hole on the bottom of hanging rod with the hole on the top metal ring and the bracket on the metal frame, and secure it with screws.
6.Separate the mounting plate from the canopy kit by removing the screws.
7.Install the mounting plate to the outlet box using two outlet box screws.
8.Determine the preferred hanging height and adjust the required rods.
9.Feed the wires through the rods and connect them together.
10.Slip canopy kit along wire and thread it into the top of the rod assembly.
11.Install canopy onto the mounting plate, and secure with the mounting screws.
12.Install the bulb(not included) into the socket.
15-3/4”

3-7/8” 2-5/8”

GLASS PANEL

20-5/8”

26-1/4”

DIFFUSER

28”

WARNING: This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov

CRYST RAMA
LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL#KEN-8306-BF

Crystorama.com

Part Number

Part Numbers

A. (1)-Mounting hardware B. (1)-Mounting plate

C. (1)-Canopy kit W5-7/8”xH1” #XRF8303BFCAN5.875IN

A

D. (2)-Mounting screw E. (1)-Rod D5/8”xL6” #XRF8303BFROD6IN

B

F. (3)-Rod D5/8”xL12” #XRF8303BFROD12IN

G. (1)-Coupler

D

C

H. (1)-Coupler

I. (1)-Center rod assembly #XRF8306BFSTEM

J. (4)-Hanging rod D3/8”xH14-5/8” #XRF8306BFSIDEROD

E

K. (1)-Light cluster

L. (1)-Top metal ring

M. (5)-Glass panel

N. (1)-Glass diffuser #XRF8306DIFF26.25IN

O. (1)-Metal frame

F

P. (4)-Screw

G H

J

I K

L

M

N
O P

References

• Crystorama Lighting
• P65Warnings.ca.gov