Lynx Lsb2 Double Side Burner Instructions

LSB2 Double Side Burner

Product Information:

The Lynx Accessory Switch Kit, model LASK, is designed to power
a variety of Lynx accessories directly without a connection to a
grill. It includes a power supply and a switch assembly with a
mounting plate. This kit is compatible with the following Lynx
products:

• LSB1 Single Side Burner
• LSB2 Double Side Burner
• LSB2PC Double Side Burner with Prep Center
• LPB Power Burner
• LSBGE Grill Extender
• LSA30, LSA36, LSA42, LPA36 Classic Cabinets
• LSA30-4, LSA36-4, LSA42-4, LPA36-4 Ventana Cabinets

The Lynx Accessory Switch Kit provides a convenient way to
independently power and control these accessories.

Product Usage Instructions:

1. Choose the desired location to mount the switch assembly using
   the included #6-32 x 1 screws.
2. Connect the 4 pin receptacle on the switch assembly to the 4
   pin plug on the accessory you want to power.
3. Connect the 4 pin plug on the power supply to the 4 pin
   receptacle on the accessory.
4. Ensure that the mounting location is close enough to the
   accessory for the two to connect properly.
5. Mount the power supply bracket to the inside of the counter
   using appropriate screws based on the counter material.
6. Plug the power supply into a wall socket.

Note: Refer to the connector identification provided in the user
manual for correctly identifying the 4 pin plug and receptacle.

For any further assistance or support, please contact Lynx
Grills, Inc. at Phone (888)289-5969 or visit their website at
www.lynxgrills.com.

LASK Installation Instructions Lynx Accessory Switch Kit

Introduction: These instructions detail the electrical connections for Lynx Accessories to an independent power source for the following products:

LSB1 Single Side Burner LSB2 Double Side Burner LSB2PC Double Side Burner
with Prep Center

LPB Power Burner LSBGE Grill Extender

LSA30 LSA36 LSA42 LPA36

Classic 30″ Cabinet Classic 36″ Cabinet Classic 42″ Cabinet Classic 36″ Pantry

LSA30-4 Ventana 30″ Cabinet LSA36-4 Ventana 36″ Cabinet LSA42-4 Ventana 42″ Cabinet LPA36-4 Ventana 36″ Pantry

Lynx Accessory Switch Kit: Model LASK

The Lynx Accessory Switch Kit is designed to power a Lynx accessory burner or storage accessory directly without a connection to a grill. The kit contains a power supply as well as a switch assembly with a mounting plate.

To the power supply

4 pin plug

4 pin receptacle

Switch and Mounting Plate
2010 Lynx Double Side Burner

Installation Instructions
1. Mount switch assembly in desired location using included #6-32 x 1″ screws.
2. Connect 4 pin receptacle on switch assembly to the 4 pin plug on the accessory.
3. Attach power supply to mounting bracket using included #6-32 x ½” screws and #6-32 locknuts.
4. Connect 4 pin plug on power supply to 4 pin receptacle on the accessory.
5. After assuring that mounting location is close enough to the accessory for the two to connect, mount power supply bracket to the inside of the counter. Screws used for mounting will depend on counter material.
6. Plug power supply into wall socket.

Precautions while working on electrical connections: Read and understand the instruction manuals provided with both the grill and accessory being installed. Review these instructions in their entirety before beginning. TURN OFF ALL GAS AT IT’S SOURCE to the appliances BEFORE beginning any electrical work. When working on an island installation, open any doors or drawers and allow the space to ventilate before beginning any work. Unplug the transformer / power supply from it’s receptacle under the island.

Connector Identification

4 pin PLUG

4 pin RECEPTACLE

Lynx Grills, Inc. / 62201 HWY 82 West Greenwood, MS 38930 / Phone (888)289-5969 / www.lynxgrills.com

33196 Rev C

030123

References

• Lynx Grills - The Finest Outdoor Kitchens & Grills