Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenance
- Remove & empty Dirt Tank
- Clean both the carbon and foam filters – located in the top lid of dirt tank
- Filters can be washed in warm water with mild dish soap > Allow to completely air dry (24 – 48 hours) before re-installing
- The carbon filter should be inserted 1st, then the foam filter
- Clean both the carbon and foam filters – located in the top lid of dirt tank
- Remove & clean the Cyclone
- Open the bottom lid, reach in & twist cyclone to the left to remove
- Cyclone can be washed in warm water with mild dish soap > Allow to completely air dry (24 – 48 hours) before reinstalling
- Open the bottom lid, reach in & twist cyclone to the left to remove
- For replacement Filters > Go to Parts & Supplies
- If you were having suction issues and the steps above did not resolve > Go to Lower Hose/Foot
