Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenance
No > You’ll want to follow the complete list of steps before continuing > Go to No Suction
Yes > Remove & empty Dirt Tank
- Release the Cyclone Assembly by twisting to the left to disconnect & remove
- Clean Cyclone Assembly of all debris
- Cyclone Assembly can be rinsed > Allow to completely air dry (24 – 48 hours) before reinstalling
- Clean Cyclone Assembly of all debris
- Remove Filter Cup
- Remove Filters from Filter Cup
- Filters can be washed in warm water with mild dish soap > Allow to completely air dry (24 – 48 hours) before reinstalling
- Remove Filters from Filter Cup
- For replacement Filters > Go to Parts & Supplies
- If you were having suction issues and the steps above did not resolve > Go to Lower Hose/Foot
