Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenance
- Remove & empty Dirt Tank
- Hold Dirt Container over garbage can and press the “Push to Empty” button
- Release the Separator by twisting to the right to disconnect & remove
- Separator can be rinsed > Allow to completely air dry (24 – 48 hours) before reinstalling
- Remove all Filters
- Remove Pre-Motor filters > Separate and check both sides for dirt
- Both Filters and Separator Screen can be rinsed > Allow to completely air dry (24 – 48 hours) before reinstalling
- Remove the Post-Motor Filter
- Press the red release button to remove cover and access Post-Motor Filter
- This Filter cannot be washed and need to be replaced if dirty
- Press the red release button to remove cover and access Post-Motor Filter
- For replacement Filters > Go to Parts & Supplies
- If you were having suction issues and the steps above did not resolve > Go to Lower Hose/Foot
