Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenance
- Remove & empty Dirt Tank
- Remove the Cyclone by twisting to the left to disconnect & remove
- Cyclone can be washed and rinsed > Allow to completely air dry (24 – 48 hours) before reinstalling
- Remove all Filters
- Open the Tank Lid > Remove the Carbon and Foam Filters
- Filters can be washed and rinsed > Allow to completely air dry (24 – 48 hours) before reinstalling
- Remove the Post-Motor Filter
- Recline the Vacuum> Remove the Filter Door just above the Height Adjustment Knob by pushing down on the latch and pulling the door out
- Grasp the sides of the Filter and pull to remove
- The pleated Post-Motor Filter may not be washed, replace Filter as needed
- Grasp the sides of the Filter and pull to remove
- For replacement Filters > Go to Parts & Supplies
- If you were having suction issues and the steps above did not resolve > Go to Lower Hose/Foot
