Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenanc
- Empty the Dirt Tank over a garbage bin
- Unlock the Dirt Tank by twisting to the left to disconnect & remove
- Remove all Filters
- Open the Tank Lid > Lift the release latch on the front
- Remove Filter > Reattach Tank Lid
- Filter can be rinsed > Allow to completely air dry (24 – 48 hours) before reinstalling
- Remove Filter > Reattach Tank Lid
- Twist to remove the Separator from the bottom of Dirt Tank
- Separator can be rinsed > Allow to completely air dry (24 – 48 hours) before reinstalling
- Remove the Post-Motor Filter
- Pull tab up to open cover of Post-Motor Filter
- Twist Filter counter clockwise to unlock and remove
- The Post-Motor Filter cannot be washed
- Remove debris regularly
- Replace filter when needed
- The Post-Motor Filter cannot be washed
- For replacement Filters > Go to Parts & Supplies
- If you were having suction issues and the steps above did not resolve > Go to Lower Hose/Foot
