Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenance
- Remove and empty the Dirt Tank
- Release the Separator by twisting to the right to disconnect & remove
- Clean Separator of all debris
- Separator can be rinsed > Allow to completely air dry (24 – 48 hours) before reinstalling
- Clean Separator of all debris
- Remove the Pre-Motor Filter
- Pull out the Filter Tray > Remove the foam Pre-Motor Filter
- Filters can be washed in warm water with mild dish soap > Allow to completely air dry (24 – 48 hours) before reinstalling
- Pull out the Filter Tray > Remove the foam Pre-Motor Filter
- For replacement Filters > Go to Parts & Supplies
- If you were having suction issues and the steps above did not resolve > Go to Lower Hose/Foot
