Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenance
- Remove & empty Dirt Tank
- Twist the Dirt Tank Lid counter clockwise to unlock the Tank Lid and remove the Separator
- Clean Separator of all debris
- Separator can be rinsed > Allow to completely air dry (24 – 48 hours) before reinstalling
- Clean Separator of all debris
- Remove the Rubber Gasket located in the top of the Separator
- If damaged or missing > Go to Parts & Supplies
- Remove the Pre-Motor Filter from the Tank Lid
- Filters can be washed in warm water with mild dish soap > Allow to completely air dry (24 – 48 hours) before reinstalling
- For replacement Filters > Go to Parts & Supplies
- If you were having suction issues and the steps above did not resolve > Go to Lower Hose/Foot
