Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenance
- Remove Dirt Tank from Hand Vac
- Grip the top portion of tank and pull up to remove the separator (the bottom ring of the separator will activate to “wipe” debris from screen & deposit into tank)
- Clean debris from Separator
- Empty debris from Dirt Tank
- Pull the Filter Frame from the top of the Separator
- Remove Pre Motor Filter and clear debris (machine should not be used without Filters installed)
- Pre Motor Filter can be rinsed in warm water > Allow to completely air dry (24 – 48 hours) before reinstalling
- Remove Pre Motor Filter and clear debris (machine should not be used without Filters installed)
- Insert the Filter with tag towards the Filter Frame
- Insert Filter Frame into Separator > Separator into Dirt Tank
- Attach Dirt Tank to Hand Vac
- You should hear a click when Tank is secure
- The Post Motor Filter is located on the back of the Hand Vac
- Press the latch on the back of the Hand Vac > Remove Filter Cover > Pull out Filter
- Post Motor Filter can be rinsed in warm water > Allow to completely air dry (24 – 48 hours) before reinstalling
- For replacement Filters > Go to Parts & Supplies
- If you were having suction issues and the steps above did not resolve > Go to Brush/Foot Area
