Elco Lighting Ert413ct5w 4 Inch Led Recessed Gimbal Downlight With 5-cct Switch User Manual

Elco Lighting Ert413ct5w 4 Inch Led Recessed Gimbal Downlight With 5-cct Switch User Manual

ELCO-LOGO

ELCO Lighting ERT413CT5W 4 inch LED Recessed Gimbal Downlight with 5-CCT Switch

ELCO-Lighting-ERT413CT5W-4-inch-LED-Recessed-Gimbal-Downlight-with-5-CCT-Switch-PRODACT-IMG

4″ LED Recessed Gimbal Downlight with 5-CCT Switch

Our 4″ LED Recessed Gimbal Downlight is designed for quick and easy installation without a housing for both new construction and remodel applications, gives you the options you are looking for in one fixture. The manual switch allows you to choose between 2700K, 3000K, 3500K, 4000K or 5000K. IC-Rated for use with direct contact with insulation.

Features                                                            Specifications

 

Adjustable Gimbal offers 25º tilt range                                     Wattage               10W

IC Airtight for use with direct contact to insulation.

Designed to fit in plenums as shallow as 3″.                              Lumens                650 lm

Eliminates the need for housing.                                              Voltage                 120V

New Construction application requires mounting plate

or frame.                                                                              Color Temp.  2700K, 3000K, 3500K,

Remodel applications require no additional accessories.                                 4000K, 5000K

Wet Location allows for use indoors or outdoors.                       Dimmable           Triac/ELV

ETL listed                                                                              Lamp Type         LED

Includes driver and Jbox.

CRI                        90+

Wet Location Listed

 

Technical Details

 

Optics: Polycarbonate lens diffuses light evenly throughout space with no LED pixelation.

 

Construction: IC rated driver and fixture are tested and approved for direct contact with insulation. Plenum rated cable connector to connect from module to remote driver box. Isolated driver integrated inside aluminum remote box with two knockouts with slots for pryout.

 

Installation: Designed for super shallow ceiling plenums without any housing. High strength steel spring clip for easy installation. Hole cut out template provided for accurate hole size for proper trim installation.

Maximum hole size should not exceed 4 1/4″ for this product. Suitable installation for t-grid and drop ceiling applications.

 

Electrical: Standard input wattage is 10W, 65 lumens per watt.

 

Dimmability: Works with 120V Triac/ELV type dimmers. Dims down to 10%. For full list of dimmers, refer to the Dimmer Compatability List.

 

Listings: ETL Listed for Wet Locations. IC-Rated for direct contact with insulation.

 

Warranty: 5-year limited warranty.

DimensionsELCO-Lighting-ERT413CT5W-4-inch-LED-Recessed-Gimbal-Downlight-with-5-CCT-Switch-FIG-1

 

Product Numbers
Item                  Lamp Lumens CCT 

Watts Voltage Dimming Finish

type
2700K,
3000K,
ERT413CT5W LED       650 lm  3500K,10W       120V              Triac/ELV White
4000K,
5000K

4 Elm” New Construction FramesELCO-Lighting-ERT413CT5W-4-inch-LED-Recessed-Gimbal-Downlight-with-5-CCT-Switch-FIG-2

4″ Elm” AccessoriesELCO-Lighting-ERT413CT5W-4-inch-LED-Recessed-Gimbal-Downlight-with-5-CCT-Switch-FIG-3

2042 E. Vernon Ave., Vernon, CA 90058 • Tel (323) 231-2600 Fax (323) 231-3200 • elcolighting.com
© ELCO Lighting 2022. All rights reserved • Rev. 12 Jul 2022 • ELCO Lighting reserves the right to make specification and design changes without notice.

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals