DESK-TOP1AC-B 63 x 32 Inches Table Top with Built In Power Strip
Product Information: 63 x 32 Table Top with Built-in Power
Strip
The 63 x 32 Table Top with Built-in Power Strip is a desk
accessory that allows you to have a spacious work area with an
integrated power strip for your electronic devices. It includes a
power strip, grommet cover, and pre-drilled holes for most control
panels and crank handles. The desk top is made up of three panels
(right panel, middle panel, and left panel) and four support bars.
The product comes with all necessary hardware and tools required
for assembly.
Product Usage Instructions
- Unbox the package and check the contents against the package
contents list in the instruction manual. - Place Desktop Panels (A, B, C) upside down on a protective
surface and insert Wooden Dowel Pins (S-C) into Middle Panel (B).
Connect Right Panel (A) and Left Panel (C) to Middle Panel (B)
using Wooden Dowel Pins (S-C). - Attach Support Bars (D) to predrilled holes in desktop assembly
using ST4.2x16mm Screws (S-A) and a Phillips screwdriver. - Install Power Strip (F) into desktop using ST3.5x13mm Screws
(S-B) and a Phillips screwdriver. Place Grommet Cover (E) into
grommet hole. Cover can be used for cable management. Note: Turn on
Overload Protection Switch. It will flip if power exceeds 1500W. Do
not frequently flip the switch manually. - Place desk frame upside down on the desktop assembly. Adjust
frame width to match desktop mounting holes, and secure frame to
desktop assembly using hardware provided in your desk frame kit.
For VIVO frames, pre-drilled holes have been included for most
control panels and crank handles. NOTE: Holes for some control
panels and cranks are not pre-drilled. In this case, you must drill
your own. - Make sure all screws are tightened and the desk is stable
before use.
If you face any issues during assembly or have any questions
about the product, you can contact the VIVO support team by calling
309-278-5303, emailing [email protected], or chatting live with an
agent on their website (www.vivo-us.com).
WARNING: CHOKING HAZARD – SMALL PARTS – NOT FOR CHILDREN UNDER 3
YEARS. ADULT SUPERVISION IS REQUIRED.
63″ x 32″ Table Top with Built-in Power Strip
Instruction Manual
SKU: DESK-TOP1AC-B
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/desk-top1ac-b
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
www.vivo-us.com Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A (x1) Right Panel
B (x1) Middle Panel
C (x1) Left Panel
D (x4) Support Bar
E (x1) Grommet
Cover
S-A (x16) ST4.2x16mm
Screw
F (x1) Power Strip
S-B (x2) ST3.5x13mm
Screw
S-C (x6) Wooden Dowel Pin
TOOLS NEEDED
Phillips Screwdriver
ASSEMBLY STEPS
STEP 1
Place Desktop Panels (A, B, C) upside down on a protective surface and insert Wooden Dowel Pins (S-C) into Middle Panel (B). Connect Right Panel (A) and Left Panel (C) to Middle Panel (B) using Wooden Dowel Pins (S-C).
A B C
S-C
2
STEP 2
Attach Support Bars (D) to predrilled holes in desktop assembly using ST4.2x16mm Screws (S-A) and a Phillips screwdriver.
S-A D
STEP 3
Install Power Strip (F) into desktop using ST3.5x13mm Screws (S-B) and a Phillips screwdriver. Place Grommet Cover (E) into grommet hole. Cover can be used for cable management.
E
S-B
F
Note: Turn on Overload Protection Switch. It will flip if power exceeds 1500W. Do not frequently flip the switch manually.
STEP 4
Place desk frame upside down on the desktop assembly. Adjust frame width to match desktop mounting holes, and secure frame to desktop assembly using hardware provided in your desk frame kit. For VIVO frames, pre-drilled holes have been included for most control panels and crank handles.
NOTE: Holes for some control panels and cranks are not pre-drilled. In this case, you must drill your own.
Bottom Side
Right Panel (A)
Left Panel (C)
Pre-drilled holes for panels and cranks
3
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED: 12/06/2022 REV1
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
AVG. RESPONSE TIME (within office hrs): 1HR 8M – 23% within < 15m – 38% within < 30m – 61% within < 1hr – 83% within < 2hr – 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Register a .US.COM domain today!
VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
Black 63” x 32” Table Top with Built-in Power Strip – VIVO - desk solutions, screen mounting, and more
