Eph Controls Cdtp2cdtp2 Room Thermostat Hardwired Instruction Manual

CDTP2CDTP2 Room Thermostat Hardwired
Instruction Manual

Important: Keep this document CDTP2 Room Thermostat Hardwired
Installation Instructions
For use in normal environments.

CDTP2CDTP2 Room Thermostat Hardwired

CAUTION! Installation and connection should only be carried out by a qualified person and in accordance with national wiring regulations.

• Before commencing any work on the electrical connections, you must first disconnect the thermostat from the mains.
• None of the 230V connections must be live until the installation has been completed and the housing is closed.
• Only qualified electricians or authorised service staff are permitted to open the thermostat.
• There are parts that carry mains voltage behind the cover. The thermostat must not be left unsupervised when open. (Prevent non specialists and especially children from gaining access to it.)
• If the thermostat is used in a way not specified by the manufacturer, its safety may be impaired.
• Prior to setting the thermostat, it is neccessary to complete all required settings described in the section.

This thermostat can be mounted in the following ways:

1. To a recessed conduit box
2. To a surface mounted box
3. Directly mounted on wall

  EPH Controls Ireland
[email protected]
www.ephcontrols.com
EPH Controls UK
[email protected]
www.ephcontrols.co.uk

References

• Home Page - EPH Controls
• Home Page - EPH Controls