Eph Controls Crtp2 Room Thermostat Battery Instruction Manual

EPH CONTROLS CRTP2 Room Thermostat 
Battery Instruction Manual

CAUTION!

Installation and connection should only be carried out by a qualified person and in accordance with national wiring regulations.

• Before commencing any work on the electrical connections, you must first disconnect the thermostat from the mains.
• None of the 230V connections must be live until the installation has been completed and the housing is closed.
• Only qualified electricians or authorized service staff are permitted to open the thermostat.
• There are parts that carry mains voltage behind the cover. The thermostat must not be left unsupervised when open. (Prevent non specialists and especially children from gaining access to it.)
• If the thermostat is used in a way not specified by the manufacturer, its safety may be impaired.
• Prior to setting the thermostat, it is necessary to complete all required settings described in the section.

This thermostat can be mounted in the following ways:

1. To a recessed conduit box
2. To a surface mounted box
3. Directly mounted on wall

EPH Controls Ireland

[email protected]
www.ephcontrols.com

EPH Controls UK

[email protected]
www.ephcontrols.co.uk

References

• Home Page - EPH Controls
• Home Page - EPH Controls