LUXPRO LP366 LED Handheld Worklight User Manual
Features
Rugged design
Area light, LED flashlight
360° swivel hook
Dual molded rubber design
Magnetic base
Adjustable position stand
3 Modes: Area High/ Area Low / Flashlight High
Weather resistant IPX4
Operation Instructions
On/Off: Press power button and release
Cycle Modes: Press and release button (Flashlight High/ Area Low/Area High)
ANSI/PLATO FL1 STANDARD
MODES |
|
|
|
| Area High | 220 lm | 3h 30m | 20 m |
| Area Low | 90lm | 6h | 5m |
| Flashlight High | 115 lm | 8h 10m | 10m |
Usage and Maintenance
Battery Replacement: In a dry environment, locate the battery access door opposite from the on/off button. Press lightly and push the battery access door down. Remove batteries. Insert new batteries into the slots following the +/- symbols to ensure proper battery arrangement. Carefully reinstall the battery access door by pushing lightly upwards until the door clicks into the closed position.
Care Instructions: If you know it’s going to be a while between uses, we suggest removing batteries from your light and storing your gear in a dry, protected place.
Product Warranty
Limited 30-Day Warranty against manufacturer’s defects from time of purchase. For warranty claims contact Lexapro by calling 801-553-8886. You may also send email to [email protected].
luxpro.com 866.553.8886 14725 S Porter Rockwell Blvd Set C Bluff dale, UT 84065.
