Luxpro Lp1036 High-output Handheld Flashlight User Manual

Luxpro Lp1036 High-output Handheld Flashlight User Manual

USER MANUAL
LP1036
High-Output Handheld Flashlight
6 AAA BatteriesLUXPRO LP1036 High Output Handheld Flashlight

Operation Instructions

On/Off: Press and release the button on the side of the light to turn the light on and off.LUXPRO LP1036 High Output Handheld Flashlight - Operation

Cycle Modes: Press the button on side of the flashlight quickly to cycle through modes (High/Medium/Ultra-Low). If the light remains in a  single mode for longer than 3-5  seconds the next press of the button will turn the light off.
Light automatically resets to High mode when turned off.
Hidden Strobe On/Off: Press and hold the button for 3 seconds to activate the hidden strobe. The flashlight will remain in hidden strobe mode until it is deactivated by pushing and holding the button for 3 seconds again.

Battery Replacement

The LP1036 can use 6 or 3 AAA batteries.
To replace the batteries, turn the tail cap counterclockwise to remove it. Tip the light downward to slide the batteries out of the tubes. LUXPRO LP1036 High Output Handheld Flashlight - Battery

LUXPRO LP1036 High Output Handheld Flashlight - Battery 1To use light with 6 batteries, insert 3 batteries into each tube (+) side first (batteries will stick out of the opening slightly).
To use light with 3 batteries, insert 3 batteries into just one of the tubes (+) side first.

For best results, we recommend using brand new alkaline batteries that are the same voltage and brand. Re-attach the tail cap by pressing down and turning it clockwise until tight.
If you know it will be a while between uses, we suggest removing the batteries from the flashlight and storing it in a dry, protected place.

Features

Constructed with aircraft-grade aluminum
Long-range LPE optics
Patented TackGrip rubber grip
Ergonomic side button
Tactical on/button
IPX4 waterproof rating
Runs on 6 or 3 AAA batteries (6 AAA included)

ANSI/PLATO FL1 STANDARD
MODESLUXPRO LP1036 High Output Handheld Flashlight - icon
LUMENS
LUXPRO LP1036 High Output Handheld Flashlight - icon 2
RUN TIME

BEAM DISTANCE
High600 lm3h 30m 380m
Medium210 lm13h160m
Low50 lm46h 30m90m
Strobe600 lm

Product Warranty

The LP1036 has a Limited Lifetime Warranty Against Manufacturer’s Defects from the time of purchase.
For warranty claims please contact us by calling 801-553-8886 or
sending an email to [email protected]

luxpro.com
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
866.553.8886

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals