Nedis Vswi3473at | Vswi3475at Hdmi Switch User Manual

Nedis Vswi3473at | Vswi3475at Hdmi Switch User Manual

VSWI3473AT VSWI3475AT HDMI Switch

Nedis VSWI3473AT | VSWI3475AT HDMI Switch

User Manual

Preface

Thank you for purchasing the Nedis VSWI3473AT / VSWI3475AT.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.

Product description

Intended use
This product is exclusively intended to switch multiple HDMI sources into 1 HD monitor or projector.
The product is not intended for professional use.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
Product
HDMI Switch
Article number
VSWI3473AT / VSWI3475AT
Dimensions (l x w x h)
180 x 70 x 22 mm
Supported Resolutions
4K @ 60 Hz, 2160p, 1080p and all possible resolutions below
Input DDC signal
5 V p-p (TTL)
Video output
HDMI
Video Bandwidth
6 Gb/s / 600 MHz
Max. transfer rate
6 Gb/s
Operating temperature
0 °C – 35 °C
Operating humidity
10 – 85% (no condensation)
Power supply
VSWI3473AT 5 VDC / 1 A VSWI3475AT 5 VDC / 2 A
Power consumption
5 W
Main parts (image A)
19723 1422 Nedis - VSWI3475AT Main Parts
A
1. HDMI Switch
2. Remote
3. Power supply
4. Select button

Safety instructions

WARNING
  • Only use the product as described in this manual.
  • Only use the provided power supply.
  • Do not unplug the power supply by pulling on the cable. Always grasp the plug and pull.
  • Do not use the product if a part is damaged or defective. Replace a damaged or defective device immediately.
  • Do not plug or unplug the power supply with wet hands.
  • Do not immerse the product in water.

Installation

  • Check the contents of the package
  • Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Connecting the product
19654 1422 Nedis - VSWI3473AT connection diagram
B
See image B/C for a connection overview.
19723 1422 Nedis - VSWI3475AT CONNECTION DIAGRAM
C

Using the product

 Press A4 to switch between the input or use A2.

Warranty

 Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

Disclaimer

 Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

afdanking
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product VSWI3473AT / VSWI3475AT from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via:
 
For additional information regarding the compliance, contact the customer service:
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC ’s-Hertogenbosch, the Netherlands

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals