BT-200 SPLIT
User’s Manual
Step 1 – Power On Bluetooth Connection
Long•press ‘MASTER’ and ‘SUB·MASTER’
simultano ously for 2 seconds, you will hear prompt tool of power on, and they ill b! Allin to connect automatically. AA audible beep will sound when connected successfully. The indicator light of SIJB- MASTER will remain blue, and the master indicator light flashes quickly.
Step 2 – Phone Bluetooth Choose Device
Find “BT-200· In your Bluetooth list and select It.
Step 3 – Pairing Success Bluetooth Indicator
The LED Indicator remains blue once the pairing Is done, music may be played afterward.
TWS Function
Long press MASTER and SUB-MASTER simultaneously for two seconds, you will hear a prompt tone of power on, and they will b! Allin to connect automatically. (Please tum on Bluetooth on your device before 1WS pairing)
Basic Operation
POWER Bl/TTON/MULTI-RJNCTION BUTTON
Power on/oft: Long Press tor 2 seconds Answer/end call: Short Press on MASTER speaker
Reject call: Press twice on MASTER speaker
Resume/pause music: Short Press
Disconnect TWS and Bluetooth: Press3x to disconnect TWS, then 2x ID disconnect Bluetooth device. (±)0VOWMEBUTTONS
Volume Increase: Short press (±)
Volume decrease: Short press 0
Next track: Long press(±)
Pompous track: Long press 0
note: Both speakers are mutually controlled after pairing.
Interlace Instructions
SWITCH INDICATOR
- Blue LEO flashes quickly when turning on the speaker
- Blue LEO flashes quickly when the speakers are pairing
BLUETOOTH INDICATOR
- Blue LED will remain on after a successful connection.
- The LEO light of the SUB-MASTER will remain on, while the MASTER will flash quickly after successful pairing.
- The Blue LEO flashes CJJlckly H the speakers are beyond range of the Bluetooth source (Until will power off automatically if no connection Is made after 1 O minutes)
CHARGING INDICATOR
- Red LED indicator will remain illuminated while char al no.
- Red LED indicator will tum off after a full charge.
- Red LEO Indicator will flash when the battery Is low.
- The LED Indicator will tum off when powered off.
BT-200 Specifications
Product Name: BT-200 SPLIT
Bluetooth VerSion: 5.0
Barney Capacily: 1500mAh x 2
Play lime: 10-12 hours
Charging lime: 3-4 hours
Driver Units: 10W x 2
Charging Current: 5Y / O.IA
Procu:t Dimensions: 84 x 84 x 210mm
Product Weight: 750g
NOTES:
- Please read this manual carefully before use.
- Upon using the speaker for the first Ume, please fully charge the unit.
- Please use the Included certified adapter which has passed national safety certifications.
- Please charge the speaker at least once a month to maintain battery perform, ance.
- Using this speaker in an extremely cold or hot environment (beyond the range of 104’F to -20′ ) may trigger the auto tum off D to protect the internal cirC1Jit. F
- Clearing this speaker In a high-temperature environment may try! the lager the auto-tum off for charging to protect the battery. The Power Indicator will nash quickly ID Indicate that the charging environmental temperature or the product Internal temperature Is too high.
- Recommended ambient slDrage temperature: -20’F-95’F RH <70% (recommended 1rc :1:s· ).
FAQ
What kind of charger should ire use for the Speaker?
A: While all common USB-C chargers can be used. we suggest 5V/2A or above 2A.
Q: What if there disconnection sound during payback?
A Noma! range of the Bluetooth speaker is 30ft a clear uro since path. Please check if the speaker Is within rape with a clear path
Q: Why did the speaker power off Autonet may without the Bluetech Dalat isn’t.
A: If the weaker is not Plead for banger tan 10nrt t via as Torre sticafty tun off. 0: Why does the speaker not connect to the ance-paired phone or dote? k. Remote ET-203 from your IikeD011 OSte List then restart paling tog 1-3) 0: What Is the start-up mode of the Weaker? k Dank mode is Why wit the speaker not prow up? A: Hugh the charger and reby In a few minutes or by Oolong press the power Cotton Ibr 10-30 seconds to force reset
IMPORTANT SAFETY INSTRUCTIONS
- Do not peace* distort* a repair Fab Snake* Owens it nay cause product damp or peacoat Injury
- Do not use to the speaker in dual tumid, Oy, an IiiPierriperature envir Onrre.
- Do not place Ms weaker near a heat wain (Rid sunlit;ht ki a dusty tree an on a vibrating surface.
- In order tot Mate the ask of Ike. please donee COS If Veit sortie In use (newspapers, curtains MI S. Ns *Wag Is rated IPX7. please do not exceed Fe rootlet para me a/ s (submerged up to 1 meter of water for 30 nerves
- When any part of to product 4 damaged. such a the Power Call, WOO. HOW entering Inc an object falling at the device, and Is mare Pecoraro namely or his. ft must be repaired
- When the Induct is fully Charge.
Made in China
