Weloom 30135645 Basic Led Panel Ota19 Non-dim Instruction Manual

Weloom 30135645 Basic Led Panel Ota19 Non-dim Instruction Manual

WELOOM - logoBASIC LED Panel OTA19 non-DIM
Instruction Manual 

Safety instructions

Carefully read all the steps of the installation process and all the information in these instructions prior to start-up and keep the instructions for maintenance work and de-installation!
Explanation of warning levels
The following warning notices must be heeded under all circumstances; otherwise, injuries and/or property damage is possible.
Warning-icon.png Warning! This warning notice denotes hazards that can cause severe and/or even fatal injuries.
warning 2 Caution! This warning notice denotes hazards that can cause health risks and/or injuries.
! Important. This warning notice denotes hazards that can cause malfunctions and/or property damage.
WELOOM 30135645 BASIC LED Panel OTA19 non-DIM - iconTip. This notice denotes useful information and/or advice.
Explanation of important pictograms and symbols
WELOOM 30135645 BASIC LED Panel OTA19 non-DIM - icon 1 This symbol denotes trained, professional personnel who is authorized to perform an electrical connection.
WELOOM 30135645 BASIC LED Panel OTA19 non-DIM - icon 2 This symbol denotes trained, professional personnel who is authorized to perform an installation.

Safety instructions
WELOOM 30135645 BASIC LED Panel OTA19 non-DIM - icon 3 Warning! Risk of electric shock! Only carry out installation and maintenance if the system is de-energized!
! Important. The illuminant in this luminaire cannot be replaced. When the luminaire reaches the end of its service life, the entire luminaire will have to be disposed of properly and replaced as a whole.
WELOOM 30135645 BASIC LED Panel OTA19 non-DIM - icon 4 Important. In order to avoid contamination, please make sure to wear clean work gloves.
important advice regarding electronic ballasts (also known as Electronic Control Gear, ECG)
Only open the neutral disconnect terminal when de-energized and close before restarting, as interruption of the neutral conductor in a three-phase circuit will cause overvoltage damage to the lighting system. Please ensure the proper ambient conditions in which the luminaire may be used. Any deviation from these conditions will reduce the service life; in extreme cases, early failure is possible. The connection lines for the control inputs of dimmable ECG (1…10 V, DALI, etc.) must be compatible with 230 V mains voltage (basic insulation).
Advice on the proper use
Please ensure proper ambient conditions for the luminaire (interior spaces with an ambient temperature of to 25 °C).
Protection class: I
Protection type of terminal compartment: IP20
Protection type of parts facing the room: IP40
WELOOM 30135645 BASIC LED Panel OTA19 non-DIM - FigDustbin Icon Advice on proper disposal of electric/electronic devices
Electric and electronic devices should be collected and disposed of separately. If in doubt, please contact your local authority or specialized disposal companies for advice on proper disposal. This product contains a light source of energy efficiency class D

WELOOM 30135645 BASIC LED Panel OTA19 non-DIM - Fig 1WELOOM 30135645 BASIC LED Panel OTA19 non-DIM - Fig 2
WELOOM 30135645 BASIC LED Panel OTA19 non-DIM - Fig 3WELOOM 30135645 BASIC LED Panel OTA19 non-DIM - Fig 4

watt24 GmbH
Zum Kleinfeld 13
59469 Ense
Deutschland

Do you have a problem?

We have an assembly step not explained clearly enough.
An accessory is missing?
Your product does not seem to function properly.
Please contact us as soon as possible and we will take care of you immediately!
Call Europe-wide:
+49 69 667737395
[email protected]
Personal live chat available online:
www.watt24.com

WELOOM - logoWWW.WATT24.COM

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals