5-Ft. Inflatable Animated Jack O Lantern
Instruction Manual
* NIGHT TIME SETTING IS RECOMMENDED
FOR BEST VIDEO VIEWING EXPERIENCE
IMPORTANT:
- ALWAYS MAKE SURE THERE IS NO OBSTACLES BLOCKING THE AIR INLET DURING INFLATION
- Please disconnect when not using for extended periods of time.
- Do NOT drop or shake the unit.
- Please ensure that Inflatable is placed in temperatures within 20°F – 100°F
- CLEAN THE AIR INLET AFTER USE
STAKING KIT INCLUDES:
4 pcs of Stake A
3 pcs of Stake B
3 pcs of 2 meter long nylon String
STAKING TO THE GROUND:
Stake A is used to fix the inflatable on ground and prevent it from moving.
Stake B is used to further stabilize the inflatable and help it hold up well in a mild wind.
STEP 1
STAKE A
Use Stake A to pass it thru the loops attached to the bottom of the inflatable.
Push the stake on soft or grassy ground.
STEP 2
STAKE B
Tie one end of the string to one of the loops on the waist. Then tie the other end of the string to Stake B.
STRING
Then push stake B on soft or grassy ground.
TO USE:
- Be sure inflatable is zipped up.
- To turn on plug into outlet.
- To turn off un plug and un-zip the inflatable to let air out.
CONTROLS:
Still Mode:
Give Inflatable Jack a decorative look by entering into still mode. Jack will not run any animation but instead will maintain a still face. Press and hold the + & – buttons simultaneously for 3 seconds to enter into still mode. To exit press any button to resume animations.
*Note: Video will replay on loop until unplugged, there is no timer on Inflatable.
CARE INSTRUCTIONS:
Wipe clean with a damp cloth and allow to dry before storing away.
Connect with us:
 | pinterest.com/mindscope |
 | facebook.com/mindscopeproducts |
 | youtube.com/mindscope |
 | Instagram.com/mindscopeproducts |
PO BOX 9525
GLENDALE, CA 91226
WWW.MINDSCOPEPRODUCTS.COM
WWW.ANIMAT3D.COM
