RL 5098 Falaise Large Lantern
Product Information
Product Name: Falaise Large Lantern
Item Number: RL 5098
Package Contents: The package includes the
necessary parts for the assembly of the Falaise Large Lantern.
Bulbs are not included.
Installation: This light fixture should be
installed in accordance with all applicable local installation
codes by a person familiar with its construction and operation, as
well as the associated hazards. Before installation, carefully
inspect the item and its contents. If any damage or defect is
found, do not proceed with the installation. Retain all packaging
material until the installation is complete and approved.
Tools Required (Not Included):
- Phillips Screwdriver
- Slotted Screwdriver
- Slip Joint Pliers
- Measuring Tape
- Wire Strippers
- Chain Pliers
- Wire Cutters
Persons Required: Two
Product Usage Instructions
- Carefully remove all parts from the box and place them on a
clean, soft surface. - If not provided, obtain a 1/4 IPS threaded pipe and secure it
to a suitable junction box using appropriate hardware. Ensure the
pipe is securely attached. - Attach the bracket (A) to the junction box using screws or
other suitable fasteners. - Connect the ground wire from the junction box to the green
ground screw (H) on the bracket (A). - Connect the fixture wires to the corresponding wires from the
junction box, following the color coding (if applicable) or
matching the wire types. - Securely tighten the wire connections with wire nuts or other
appropriate connectors. - Attach the canopy (E) to the bracket (A) using the collar ring
(F). Ensure it is securely fastened. - Install the bulbs (not included) according to the instructions
provided with them. - Thread the fixture wire and ground wire through the chain (G),
making sure there is no tension on the wires when reaching the
collar loop (C). Cut any excess wires, leaving enough length to
reach the junction box. - Separate the two sides of the molded wire and strip insulation
on each side by approximately 5/8 inch. - Loosen the collar ring (F) and carefully let the canopy (E)
slip down the chain (G). - Twist all fixture wires together and slip them through the
center hole of the collar loop (C). - Tighten the collar ring (F) to secure the fixture wires and
ensure a stable connection.
ASSEMBLY INSTRUCTIONS
Diagram 2 L (4 Pcs) M
1/4 IPS Pipe (Not provided) A B
C D E F
G
L
M D H
I
J
K
Diagram 1
Bulbs not included
Falaise Large Lantern
Item # RL 5098
NOTICE:
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED):
Phillips Screwdriver
Slotted Screwdriver
Slip Joint Pliers
Measuring Tape
Wire Strippers
Chain Pliers Wire Cutters
PERSONS REQUIRED: Two
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. It is recommended to install a 1/4 IPS threaded pipe, secured to a
structural member of the building. Then install hex nut and threaded nipple (B) into receiver and tighten with the wrench. NOTE: Item must be supported independent of the junction box due to weight. 3. Remove collar loop (C) from chain (G) and secure to threaded receiver attached to structural member by tightening locknut. 4. Install canopy (E) to collar loop (C) and secure with collar ring (F). 5. Determine desired overall length, and amount of chain (G) needed. Shorten chain using chain pliers. (Keep extra chain) 6. Install glass panels (L) to fixture (K) and secure with metal bars (M). See diagram 1. NOTE: It is recommended to have a helper assist in supporting the fixture for steps 7. 7. Attach chain (G) to collar loop (C) and fixture loop (H) using quick links (D). Secure quick links (D). 8. Hang fixture cluster (J) to hook (I) on bottom of fixture loop (H), then pass fixture wires through the hole in fixture frame.
M
LI ST ED
US
ASSEMBLY INSTRUCTIONS
Diagram 2 L (4 Pcs) M
1/4 IPS Pipe (Not provided) A B
C D E F
G
L
M D H
I
J
K
Diagram 1
Bulbs not included
Falaise Large Lantern
Item # RL 5098
NOTICE:
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
9. Thread fixture wire and ground wire through chain (G). NOTE: When you reach the collar loop (C), ensure there is no tension on the wires. Cut excess wires, being sure to leave enough to reach the junction box.
10. Separate two sides of molded wire, and strip insulation on each 5/8″. 11. Loosen collar ring (F) and let canopy (E) slip down chain (G) carefully. 12. Twist all fixture wires together, and slip through center hole of collar
loop (C). NOTE: Untwist wires and separate to prepare for connection. 13. Loosen cable lock and install to end of safety cable. Run safety cable through junction box and around structural member of building. Insert cable through cable lock and tighten the ends with a screwdriver to secure. (See diagram 2) 14. Connect fixture ground wire (bare copper) to the supply ground wire (usually green or bare copper) using wire nut (A). NOTE: It is imperative that the fixture is grounded. 15. Connect fixture neutral wire (ribbed) to the supply neutral wire (usually white) using wire nut (A). 16. Connect fixture hot wire (smooth with markings) to the supply hot wire (usually black) using wire nut (A). CAUTION: Do not reverse the hot and neutral connections. 17. Make sure all wire connections are tight, then carefully tuck into the junction box. 18. Install canopy (E) to collar loop (C) and secure with collar ring (F). 19. Install light bulbs into the sockets. Care Instructions: Clean only with a soft dry cloth or feather duster. Do Not use abrasive or chemical agents.
M
LI ST ED
US
