Parrotuncle Bbw9197-6 110v 6 Light Chandelier Instruction Manual

BBW9197-6 110V 6 Light Chandelier

Product Information

The Parrotuncle BBW9197-6 110V 6-Light Chandelier is a stylish
lighting fixture that adds elegance to any room. It features a
candelabra-base design and can accommodate up to six 40-watt max.
incandescent bulbs or CFL/LED equivalents (bulbs not included). The
chandelier is designed with a durable metal finish and comes with
glass shades that can be easily cleaned.

Product Usage Instructions

1. Before starting any installation or maintenance tasks, make
   sure to shut off the power at the fuse or circuit breaker to
   prevent electrical hazards.
2. To assemble the chandelier, follow these steps:
   1. Insert a 40-watt max. candelabra-base incandescent bulb or
      CFL/LED equivalent (not included) into each socket (E) of the
      chandelier.
3. To clean the chandelier, follow these guidelines:
   1. Always ensure that the electric current is turned off before
      cleaning.
   2. Use a soft, moist cloth with mild non-abrasive soap to clean
      the fixture. Avoid using glass cleaner as it may damage the metal
      finish.
   3. For glass shades, wash them in a towel-lined sink using warm
      water and mild soap. Do not wash the shades in an automatic
      dishwasher.
4. If you encounter any issues with the chandelier, refer to the
   troubleshooting guide below:

   Problem	Possible Cause	Corrective Action
   Fixture does not light.	1. Fixture may be wired incorrectly. 2. Worn or broken bulb.	1. Check wiring. 2. Replace bulb.

Parrot

Uncle

BBW9197-6 110V
Installation & Operating Instructions for the Parrotuncle Owner’s Installation ,Manual
WARNI NG: SHUT POWER OFF AT FUSE OR CI RCUI T BREAKER

BBW9197-6 110V 6-LIGHT CHANDELIER

Parrot1 Uncle

BBW9197-6 110V
Installation & Operating Instructions for the Parrotuncle Owner’s Installation ,Manual
WARNI NG : SHUT POWER OFF AT FUSE OR CI RCUI T BREAKER

ASSEMBLY INSTR UC TIONS
9. Insert 40-watt ma x. candelabra-base incandescent bulb or CFL/LED equivalent (none included) into socket (E).

CARE AND MAINTEN ANCE
. Always be certain that electric current is turned off before cleaning this item. . Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on
fixture, as it will damage the metal finish. . All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not
wash shades in an automatic dishwasher.

TROU BLES HOOTI NG

PROBL EM

POSSIBLE CAUSE

Fixture does not light.11. Fixture may be wired incorrectly. 2. Worn or broken bulb.

CORR ECTIVE ACTIO N 1. Check wiring. 2. Replace bulb.