Hukoro F42873-05a 3-light With Chrome Vanity Light Instruction Manual

F42873-05a 3-Light with Chrome Vanity Light

Product Information

The product is a light fixture that requires assembly and
installation. It comes with all the necessary hardware, including a
mounting unit, mounting screws, screws, wire nuts, and decorative
screws. The product also requires tools for assembly, including a
ladder, safety glasses, electrical Phillips screwdriver, flat blade
screwdriver, pliers, and wire strippers. The light fixture includes
a fixture, glass, glass shade, and exploded parts. The product may
differ slightly per light fixture.

Product Usage Instructions

Assembly Instructions

Before assembly, ensure that you have all the necessary tools
and hardware required for installation.

Step 1: Mounting Unit

1. Use the mounting screws to attach the mounting unit to the
   junction box.
2. Secure the screws with a screwdriver.

Step 2: Electrical Connection

1. Make the electrical connection from the junction box to the
   fixture.
2. Connect the ground wire to the mounting unit using the
   preinstalled green ground screw.
3. Connect the positive, negative, and ground wires with the
   supplied wire nuts.
4. Secure with electrical tape.

Step 3: Fixture Attachment

1. Attach the fixture to the mounting unit through screw holes as
   shown.
2. Secure it with screws.
3. Tighten the screws with a screwdriver.

Step 4: Glass Attachment

1. Attach the glass into fixture using screws as shown.
2. Tighten the screws with a screwdriver.

Step 5: Glass Shade Attachment

1. Attach the glass shade onto fixture using decorative screws as
   shown.

Once all steps are completed, the light fixture is ready to
use.

ASSEMBLY INSTRUCTIONS

CAUTION

³Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.

TOOLS REQUIRED

³Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by
removing the fuse at the fuse box.

Ladder

Safety glasses

Electrical Phillips

tape

screwdriver

Flat blade screwdriver

Pliers

Wire strippers

HARDWARE INCLUDED

Fixture

Glass

Glass Shade

Decorative Screws

Screws

Screwdriver

Mounting Unit

Mounting Screws

Wire Nuts

*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE

EXPLODED PARTS

INSTALLATION

Mounting Screws

Screws Fixture

STEP 1
Use the mounting screws to attach the mounting unit to the junction box.

Wire Nuts Mounting Unit
Screwdriver Screws

Glass Decorative Screws Glass shade

STEP 2
Make the electrical connection from the junction box to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Then, connect the positive, negative and ground wires with the supplied wire nuts. Secure with electrical tape.

Black or Red wire (hot) from the junction box
White wire (neutral) from the junction box
Bare or Green ground wire from the junction box
*Sealing tape (not included)

Black wire from the fixture
White wire from the fixture
Ground wire from the Fixture
*Green Ground Screw

ASSEMBLY INSTRUCTIONS INSTALLATION

STEP 3
Attach the fixture to the mounting unit through screw holes as shown, and secure it with screws. Tighten the screws with a screwdriver.
STEP 4
Attach the glass into fixture using screws as show. Tighten the screws with a screwdriver.
STEP 5
Attach the glass shade onto fixture using decorative screws as show.