F72591-11i 1-Light Flush Mount Matte
Product Information
This product is a light fixture that requires assembly and
installation. It comes with a mounting unit, fixture, ball nuts,
mounting screws, wire nuts, and hardware required for installation.
The product also requires specific tools for installation,
including a ladder, safety glasses, electrical Phillips
screwdriver, flat blade screwdriver, pliers, and wire strippers.
The product may also require sealing tape (not included).
Product Usage Instructions
Before starting the assembly and installation process, please
ensure that you have all the required tools and hardware. Follow
the instructions below:
Step 1: Mounting Unit Installation
- Unscrew the ball nuts from the mounting unit.
- Use the mounting screws to attach the mounting unit to the
junction box.
Step 2: Electrical Connection
- Make the electrical connection from the junction box to the
fixture. - Connect the ground wire to the mounting unit using the
preinstalled green ground screw. - Connect the positive, negative, and ground wires with the
supplied wire nuts. - Secure with electrical tape.
Step 3: Fixture Installation
Secure the fixture to the mounting unit with the ball nuts.
Step 4: Bulb Installation
Install a bulb (not included) in the fixture.
Please note that the parts shown in the manual may differ
slightly per light fixture. Also, please exercise caution during
installation and use all necessary safety equipment, such as safety
glasses and a ladder. If you have any questions or concerns about
the product assembly or installation, please consult a professional
electrician.
ASSEMBLY INSTRUCTIONS
CAUTION
³Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
TOOLS REQUIRED
³Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by
removing the fuse at the fuse box.
Ladder
Safety glasses
Electrical Phillips
tape
screwdriver
Flat blade screwdriver
Pliers
Wire strippers
HARDWARE INCLUDED
Fixture
Mounting Unit
Ball Nuts Mounting Screws Wire Nuts
*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
EXPLODED PARTS
INSTALLATION
Wire Nuts
STEP 1
Unscrew the ball nuts from the mounting unit. Use the mounting screws to attach the mounting unit to the junction box.
Mounting Screws
Mounting Unit
Fixture
Ball Nuts
Bulbs (not included)
ASSEMBLY INSTRUCTIONS INSTALLATION
STEP 2
Make the electrical connection from the junction box to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Then, connect the positive, negative and ground wires with the supplied wire nuts. Secure with electrical tape.
Black or Red wire (hot) from the junction box
White wire (neutral) from the junction box
Bare or Green ground wire from the junction box
*Sealing tape (not included)
Black wire from the fixture
White wire from the fixture
Ground wire from the Fixture
*Green Ground Screw
STEP 3
Secure the fixture to the mounting unit with the ball nuts.
STEP 4
Install bulb (not included)
