Technical amendments reserved
System pendant luminaire for indoor use![]()
51 203.5
Instructions for use
Application
Pendant luminaire downlight · indoor luminaire with wide beam light distribution. BEGA Hybrid Optics ®: Highly efficient and low- loss light distribution, thanks to reflector and optical lens. BEGA System pendant luminaire for use in combination with various modular BEGA installation components.
Product description
Pendant luminaire downlight Cast aluminium luminaire housing, finish Colour velvet black,
Reflector surface made of pure aluminium Optical silicone lens · BEGA Hybrid Optics ®
Trim ring · Chrome finish Clear safety glass Black flex suspension 2 x 0,5@
Overall length of luminaire approx. 1500 mm
Safety class ![]()
– Conformity mark
Weight: 0.75 kg
This product contains light sources of energy efficiency class(es) F
Luminaire without canopy, for connection to an additional required BEGA Installation component (accessory)
| Lamp | |
| Module connected wattage | 11.1 W |
| Luminaire connected wattage | 14 W |
| Rated temperature | ta = 25 °C |
| Ambient temperature | ta max = 40 °C |
| 51 203.5 K3 | |
| Module designation | LED-1150/930 |
| Colour temperature | 3000 K |
| Colour rendering index | CRI > 90 |
| Module luminous flux | 1305 lm |
| Luminaire luminous flux | 1120 lm |
| Luminaire luminous efficiency | 80 lm / W |
Lighting technology
Half beam angle 37°
Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only becarried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Please note:
The luminaire can only be operated with an operating device that fulfills the requirements according to EN 61347-2-13. The maximum idle voltage of 60 V DC must conform to SELV or SELV equivalent.
Installation
LED are high-quality electronic components!
Please avoid touching the light output opening of the LED directly during installation or relamping.
Screw enclosed trim ring with attached reflector into the luminaire housing by turning it clockwise.
To operate this luminaire one of the following additional BEGA Installation components must be ordered – accessoire.
Please refer to the instructions for use for the BEGA installation component selected for luminaire installation
Please note: The manufacturer accepts no liability for damage caused by improper use or installation if no BEGA installation component is used toinstall this BEGA system pendant luminaire.
Cleaning · Maintenance
Clean luminaire regularly with solvent-free cleansers from dirt.
Replacing the LED module
The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by a qualified person usingcommercially available tools.
Disconnect the system and open the luminaire.
Please follow the installation instructions for the LED module.
Close the luminaire.
Accessories
BEGA Installation components with LED power supply unit.
Satin black finish
Depending on the desired type of installation, the following suitable installation components are available for this BEGA system pendant luminaire:
For all level ceilings:
| 13 228 | Surface-mounted canopy (Type A) on/off · 220-240 V · 350 mA DC |
| 13 281 | Surface-mounted canopy (Type AS) Smart controllable / dimmable · 220-240 V · 340 mA DC |
Suitable for level ceilings and sloped ceilings with a pitch of 0 – 40°:
| 13 231 | Surface-mounted canopy (Type B) on/off · 220-240 V · 350 mA DC |
| 13 234 | Recessed canopy (Type C) on/off · 220-240 V · 350 mA DC |
| 13 284 | Recessed canopy (Type CS) Smart controllable / dimmable · 220-240 V · 350 mA DC |
For flush and surface-mounted 3-phase Eurostandard-Plus ® track systems:
| 13 221 | Track adapter (Type D) on/off · 220-240 V · 350 mA DC |
For the accessories a separate instructions for use can be provided upon request.
| Spares | |
| LED module 3000 K | LED-1150/930 |
| Reflector | 75 |
| Glass/Trim | 75 |
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden
· [email protected]
· www.bega.com











