Zebra Shades
Product Information: Zebra Shades
The Zebra Shades are a window covering solution that offers both
privacy and light control. The shades consist of a fabric panel
with alternating sheer and opaque stripes, allowing you to adjust
the amount of light entering the room.
The shades come with two installation options: Top-Fixing and
Face-Fixing. The top-fixing method involves fixing the brackets to
the lintel (ceiling) of the recess, while the face-fixing method
requires mounting the brackets onto a facing surface, such as a
wall or window frame.
It is important to note that the outermost brackets should be
positioned at least 5cm away from the ends of the rail, with the
remaining brackets evenly distributed across the width.
The shades also include a chain tensioner for child safety. The
chain tensioner should be installed to a flat surface, ensuring
that the bead chain is taut but not stretched. It can be attached
to the windowsill or inside of the window frame for inside mount
shades, and to the exterior of the window frame or wall for outside
mount or wall mount shades.
The chain tensioner helps keep chain loops away from small
children and should always be installed correctly for safe
operation of the shade.
Product Usage Instructions
Installation
- Top-Fixing:
- Use the front two holes in the top of the bracket to fix it to
the lintel (ceiling) of the recess.
- Use two screws through the back plate of the bracket to mount
it onto a facing surface, such as a wall or window frame.
- Ensure that the outermost brackets are at least 5cm away from
the ends of the rail. - Distribute any other brackets evenly across the width of the
rail.
- Holding the rail at an angle, situate the T-shaped lip on the
top of the cassette into the front lip of the bracket. - Twist the back of the cassette upwards until it snaps into
place against the back lip of the bracket.
Chain Tensioner Installation
- Choose Installation Location:
- For inside mount shades, attach the tensioner to the windowsill
or inside of the window frame. - For outside mount or wall mount shades, mount the tensioner to
the exterior of the window frame or the wall.
- Using a pencil, mark the desired location of the screw holes
for the tensioner. - Drill pilot holes at the marked locations.
- Securely install the tensioner using screws, ensuring it is
fully installed so that the spring is pushed in and the chain
passes smoothly through the guide.
- Never operate the shade without a functioning and correctly
installed chain tensioner. - The chain tensioner helps keep chain loops away from small
children, providing an important safety function.
Please retain these instructions for future reference. Thank you
for purchasing this product. Please read the instructions and
warnings carefully before installation to ensure safe and
satisfactory use of this product.
Installation Guide
Zebra Shades
The brackets offer two methods of installation:
Top-Fixing
Use the front two holes in the top of the bracket to fix to the lintel (the `ceiling’ of the recess).
Face-Fixing
Use two screws through the back plate to mount onto a facing surface (a wall or window frame)
5cm
5cm
Note that the position of the outermost brackets should be at
least 5cm away from the ends of the rail, with any other
brackets evenly distributed across the width.
Bracket (side-on)
Shade (side-on)
Holding the rail at an angle, situate the T-shaped lip on the top of the cassette into the front lip of the
bracket.
Twist the back of the cassette upwards until it snaps into place against the back lip of the bracket.
P1
Installation Guide
Zebra Shades
Chain Tensioner
Child Safety
Shades with clutch controls come with a continuous chain loop, which should always be screwed to the wall with the included chain tensioner.
The chain tensioner should be installed to a flat surface, so the bead chain is taut but not stretched. Be sure not to twist or cross the chain.
On inside mount shades, the tensioner may be attached to the windowsill or to the inside of the window frame. For outside mount or wall mount shades, the bracket may be mounted to the exterior of the window frame or the wall.
With a pencil, mark the desired location of the screw holes for the tensioner and then drill pilot holes. Then install the tensioner with the screws, making sure that the tensioner is fully installed, so that the spring is pushed in and the chain passes smoothly through the guide.
The chain tensioner forms an important safety function by keeping chain loops away from small children. Never operate this shade without a functioning and correctly installed chain tensioner.
Please retain these instructions for the future reference.
Thank you for purchasing this product. Please read the instructions and warning carefully before installation to ensure safe and satisfactory use of this product.
P2
