Crystorama 131-mk Calypso Ceiling Mount Light Instruction Manual

131-MK Calypso Ceiling Mount Light

Product Information

The Crystorama Lighting Model#131-MK is a high-quality lighting
fixture designed to provide elegant and stylish illumination.
Crystorama has been a leader in the lighting industry for sixty
years, offering innovative designs and superior craftsmanship.

This fixture is Damp rated, making it suitable for use in areas
with high humidity, such as bathrooms or covered outdoor spaces. It
requires 1-Medium Base Bulb with a recommended wattage of 40 Watts,
and a maximum wattage of 60 Watts. LED bulbs are recommended for
extended use.

Please note that all electrical components must be installed by
a licensed electrician in accordance with the National Electric
Code and the appropriate local electrical codes. Failure to do so
may result in electrical danger.

This product contains lead, which is known to the state of
California to cause cancer and/or birth defects or reproductive
harm. For more information, please visit www.P65Warnings.ca.gov.

Product Usage Instructions

Hanging Installation:

1. Determine the preferred hanging height and adjust the chain
   accordingly.
2. Open one link of the chain and connect it to the fixture loop,
   then close the link. Open another link of the chain and connect it
   to the loop of the canopy, then close the link.
3. Thread the mounting screws into the matching holes of the
   mounting bar and tighten them with the small hex nut.
4. Secure the mounting bar to the outlet box using the outlet box
   screws.
5. Raise the canopy, allowing the mounting screws to protrude
   through the holes in the canopy, and secure it with the ball
   nut.
6. Hang crystals on the metal ring and bottom basket, alternating
   between glass drop A and B.
7. Hang glass drop C at the bottom of the bottom basket.
8. Install the bulb (not included) into the socket.

Ceiling Installation:

1. Loosen the hex nut of the canopy and disassemble the
   canopy.
2. Remove the loop on the top of the fixture.
3. Slip the canopy, the metal washer, and lock washer over the
   nipple, then secure them with the hex nut.
4. Thread the mounting screws into the matching holes of the
   mounting bar and tighten them with the small hex nut.
5. Secure the mounting bar to the outlet box using the outlet box
   screws.
6. Raise the canopy, allowing the mounting screws to protrude
   through the holes in the canopy, and secure it with the ball
   nut.
7. Install the bulb (not included) into the socket.
8. Hang crystals on the metal ring and bottom basket, alternating
   between glass drop A and B.
9. Hang glass drop C at the bottom of the bottom basket.

Note: The specific parts included in this product are as
follows:

• A. (1) Mounting hardware
• B. (1) Canopy W5-7/8”xH1-1/8” #XRF130MKCAN6IN
• C. (2) Finial #XRF130MKFIN
• D. (2) Loop #XRF130MKLOOP
• E. (1) Chain – L72”, 4mm thick #XRF130MKCHA4MM
• F. (1) Metal ring
• G. (1) Bottom basket #XRF131MKBT
• H. (1) Socket

For any further assistance or inquiries, please visit www.Crystorama.com.

CRYST RAMA
LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL#131-MK

Crystorama.com

Loop

WARNING:

Electrical Danger Turn Power off

Metal ring

Socket Bottom basket
A-5sets
C-1set

A-14sets B-14sets
A-10sets B-10sets B-5sets

Hang crystals on the rings alternating between crystals A and B

5-7/8”

1-1/8”

All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
You will need 1-Medium Base Bulb 40 Watts Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE This fixture is Damp rated
How to install
For hanging:
1.Determine the preferred hanging height and adjust to the chain required.
2.Open one link of chain connect it to fixture loop and close the link. Open the other one link of chain connect it to loop of canopy and close the link.
3.Thread the mounting screws into the matching holes of the mounting bar, and tighten with the small hex nut.
4.Secure the mounting bar to the outlet box with the outlet box screws.
5.Raise canopy allowing the mounting screws to protrude through the holes in the canopy, and secure with the ball nut.
6.Hang crystals to the metal ring and bottom basket, alternating between glass drop A and B.
7.Hang glass drop C at the bottom of the bottom basket. 8.Install the bulb(not included) into the socket.

13-3/4”

13”

7-1/4”

A=

30mmx29sets

B=

76mmx29sets

For ceiling:
1.Loose the hex nut of canopy and disassemble canopy.
2.Remove the loop on the top of the fixture. 3.Slip the canopy, the metal washer and lock washer over
the nipple, then secure with the hex nut. 4.Thread the mounting screws into the matching
holes of the mounting bar, and tighten with the small hex nut. 5.Secure the mounting bar to the outlet box with the outlet box screws.
6.Raise canopy allowing the mounting screws to protrude through the holes in the canopy, and secure with the ball nut.
7.Install the bulb(not included) into the socket.
8.Hang crystals to the metal ring and bottom basket, alternating between glass drop A and B.
9.Hang glass drop C at the bottom of the bottom basket.

C=

(30mm Ball with chain)x1set

WARNING: This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov

CRYST RAMA
LIGHTING THE WAY FOR SIXTY YEARS
PART NUMBER MODEL#131-MK

Crystorama.com

Part Number
Part Numbers A. (1)-Mounting hardware B. (1)-Canopy W5-7/8”xH1-1/8” #XRF130MKCAN6IN C. (2)-Finial #XRF130MKFIN D. (2)-Loop #XRF130MKLOOP E. (1)-Chain -L72”, 4mm thick #XRF130MKCHA4MM F. (1)-Metal ring G. (1)-Bottom basket #XRF131MKBT H. (1)-Socket

FOR HANGING:

SMALL HEX NUT
C
F H G

A
HEX NUT
B D E
D

FOR CEILING:

SMALL HEX NUT
LOCK WASHER
B C

HEX NUT METAL WASHER
NIPPLE

Crystals A Crystals B

Crystals C