Kwikset 99590-002 Touch Wi-Fi Fingerprint Security
Required tools
Parts in the box
REQUIRED TOOLS
Installation
- Remove your existing deadbolt
Install the latch
Install the strike
Install the exterior assembly
Install the interior assembly
Perform the door-handing process
Download app
Download the app & create an account
Follow the setup instructions in the Kwikset app to create your account
Reference Guide
Locking
To lock your door, place any finger on the fingerprint sensor. The light bar will display the following animations, beep once, and the ndoor will lock.
Unlocking
To unlock your door, place your enrolled finger on the fingerprint sensor. The light bar will display the following animations, beep once, and the door will unlock
Enabling Amazon Alexa
Follow the setup instructions to enable Amazon Alexa
Enabling Google Assistant
Follow the setup instructions to enable Google Assistant
SmartKey Re-key
Re-key the lock to work with your existing key by following the SmartKey Re-key instructions
Exterior/ Interior LED Indicators.
Exterior LED Indicators
Interior LED Indicators
Device Compatibility
Please see the Device Compatibility list to see if your device is compatible
Router Compatibility
Please see the Router Compatibility list to see if your router is compatible
Manual Door Handing
Factory Reset
Factory Reset will:
- delete all Wi-Fi settings
- delete user associations
- reset all lock settings including handing
- delete access codes and event history from the lock. Note: They will still appear in the app and cloud until the lock is deleted from the app.
Factory reset should be used when:
- you want to change the lock owner
- you have lost your phone
- you are troubleshooting on a new installation
Halo Touch at a Glance
Troubleshooting
If you have any issues, please visit our support center: kwikset.com/halo-touch or call us at 1-800-327-5625
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FAQS
Why is my Kwikset lock not unlocking?
Make sure the User Code is correct and that the Kwikset button is pushed after entering the User Code
Where is the reset button on Kwikset lock?
Ensure the door with the Kwikset 888 SmartCode deadbolt with Z-Wave or 913/914 SmartCode is open and unlocked.
How long do the batteries last in a Kwikset lock?
Replace batteries with new ones to ensure that lock is properly powered
Why is my deadbolt not unlocking?
Sometimes the lock is stuck because the parts inside it have disengaged
Any technology that connects to the internet has the potential to be hacked
Your Smart Lock will give you low-battery warnings for multiple weeks before it loses power.
What is the master code for Kwikset?
The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open
How do I check the battery on my Kwikset lock?
There are two low battery indicators on the unit. The LED light on the interior side of the lock will flash red when the batteries are low.
Why did my Smart Lock stop working?
There’s a chance that your phone simply hasn’t updated its location status in a while.
Why is my Kwikset Smart Lock not working?
Test each button on the keypad (one at a time), and listen for a beep as each button is pressed. If beeping is not heard on all buttons, replace the batteries.
What if I forgot my master code for my lock door?
You can visit a Master Lock Distributor / Retailer or submit a Lost Combination form. Bring your lock to the retailer.
How many codes can a Kwikset lock have?
The SmartCode 917 supports up to 30 user code between 4-8 digits
What does red light mean on Kwikset lock?
Amber flashes mean it is locked, while green flashes mean it is unlocked, and red means low battery.
How long does a smart lock last?
Several factors play into how long your batteries will last, including environment, temperature, and weather stripping. Typically, battery life ranges from 6 months to 1 year.
Do smart locks run out of battery?
Electronic keyless locks are extremely reliable, but like any other battery-powered device, there will eventually come a time when the battery’s power will run out
