MF5102 Malloy Open Frame Forged Lantern

Product Information:

Product Name: Malloy 14 Open Frame Forged Lantern

Item Number: MF5102

Product Description: The Malloy 14 Open Frame Forged
Lantern is a light fixture designed for installation in accordance
with applicable local installation codes. It features an open frame
design and requires bulbs for operation (bulbs not included). The
lantern should be assembled and installed by a person familiar with
its construction, operation, and associated hazards. Careful
inspection of the item and its contents is necessary prior to
installation.

Assembly Instructions:

1. Carefully remove all parts from the box. Place on a clean, soft
   surface.
2. Install the mounting plate (B) to the junction box and secure
   it with the mounting screws (C).
3. Secure the collar loop (D) to the mounting plate (B) using
   pliers to tighten the locknut.
4. Install the canopy (E) to the collar loop (D) and secure it
   with the collar ring (F).
5. Determine the desired overall length and amount of chain (H)
   needed. Shorten the chain using chain pliers and keep any extra
   chain.
6. Attach the chain (H) to the collar loop (D) and fixture loop
   (I) using quick links (G). Secure the quick links (G).
7. Hang the fixture cluster (J) to the hook on the bottom of the
   fixture loop (I), then pass the fixture wires through the hole in
   the fixture frame.
8. Thread the fixture wire and ground wire through the chain (H).
   When reaching the collar loop (D), ensure there is no tension on
   the wires. Cut any excess wires, leaving enough to reach the
   junction box.
9. Separate the two sides of the molded wire and strip insulation
   on each 5/8.
10. Loosen the collar ring (F) and carefully let the canopy (E)
    slip down the chain (H).
11. Twist all fixture wires together and slip them through the
    center hole of the collar loop (D). Untwist and separate the wires
    to prepare for connection.
12. Wrap the fixture ground wire (bare copper) around the green
    grounding screw as shown in diagram 1. Tighten it securely.
    Continue the fixture ground wire and connect it to the supply
    ground wire using a wire nut (A). Ensure proper grounding of the
    fixture.
13. Connect the fixture neutral wire (ribbed) to the supply neutral
    wire (usually white) using a wire nut (A).
14. Connect the fixture hot wire (smooth with markings) to the
    supply hot wire (usually black) using a wire nut (A). Caution: Do
    not reverse the hot and neutral connections.
15. Ensure all wire connections are tight, then carefully tuck them
    into the junction box.
16. Install the canopy (E) to the collar loop (D) and secure it
    with the collar ring (F).
17. Install the light bulbs into the sockets.

Care Instructions:

Clean the lantern only with a soft dry cloth or feather duster.
Do not use abrasive or chemical agents.

ASSEMBLY INSTRUCTIONS

A B

C

D

E

F

Diagram 1

G

H

G I

J Bulbs not included

Malloy 14″ Open Frame Forged Lantern
Item # MF5102
NOTICE:
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.

TOOLS REQUIRED (NOT INCLUDED):

Phillips Screwdriver

Slotted Screwdriver

Slip Joint Pliers

Measuring Tape

Wire Strippers

Chain Pliers Wire Cutters

1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Install mounting plate (B) to the junction box and secure with
mounting screws (C). 3. Secure collar loop (D) to mounting plate (B) using pliers to tighten
locknut. 4. Install canopy (E) to collar loop (D) and secure with collar ring (F). 5. Determine desired overall length, and amount of chain (H) needed.
Shorten chain using chain pliers. (Keep extra chain) 6. Attach chain (H) to collar loop (D) and fixture loop (I) using quick
links (G). Secure quick links (G). 7. Hang fixture cluster (J) to hook on bottom of fixture loop (I), then pass
fixture wires through the hole in fixture frame. 8. Thread fixture wire and ground wire through chain (H).
NOTE: When you reach the collar loop (D), ensure there is no tension on the wires. Cut excess wires, being sure to leave enough to reach the junction box. 9. Separate two sides of molded wire, and strip insulation on each 5/8″. 10. Loosen collar ring (F) and let canopy (E) slip down chain (H) carefully. 11. Twist all fixture wires together, and slip through center hole of collar loop (D). NOTE: Untwist wires and separate to prepare for connection.

M

LI ST ED

US

ASSEMBLY INSTRUCTIONS

A B

C

D

E

F

Diagram 1

G

H

G I

J Bulbs not included

Malloy 14″ Open Frame Forged Lantern Item # MF5102
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
12. Wrap fixture ground wire (bare copper) around the green grounding screw (see diagram 1). Tighten. Continue fixture ground wire and connect to supply ground wire (usually green or bare copper) using wire nut (A). NOTE: It is imperative that the fixture is grounded.
13. Connect fixture neutral wire (ribbed) to the supply neutral wire (usually white) using wire nut (A).
14. Connect fixture hot wire (smooth with markings) to the supply hot wire (usually black) using wire nut (A). CAUTION: Do not reverse the hot and neutral connections.
15. Make sure all wire connections are tight, then carefully tuck into the junction box.
16. Install canopy (E) to collar loop (D) and secure with collar ring (F). 17. Install light bulbs into the sockets.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do Not use abrasive or chemical agents.

M

LI ST ED

US