Medi MS-Bx00 Series Ultra Low Energy Bluetooth Beacon
Bluetooth Beacon
Ultra-Low Energy Bluetooth Beacon MS_Bx00 series0
- Ultra-low power consumption
- Easy to deploy without wiring
- Removable and replaceable battery by rotating shell
- Support single-cell and double-cell battery shipments
- SDK interface open
The Bluetooth beacon MS_Bx00 series is based on TI’s ultra-low-power BLE chip, and it is a product independently developed by the baseband part. Compatible with Bluetooth beacon protocol and ordinary private 2.4GHz protocol, mainly used in indoor and outdoor positioning. The iBeacon protocol is a broadcast protocol based on Bluetooth low energy hardware launched by Apple. The protocol is free and open. iOS 7.0 and Android 4.3.3 and above operating system versions support this protocol. The working method is that a device equipped with a low-power Bluetooth communication function sends its own unique iBeacon ID to the surroundings, and the application software that receives the ID will trigger an action based on the ID. The iBeacon ID refers to the ID broadcast by the iBeacon device. The ID consists of three fields: UUID, Major, and Minor. The uniqueness of the device ID must be ensured.
Product Specification
| Model | MS_Bx00 | |
| Features | Broadcast ibeacon packages regularly | |
| Working Frequency | 2.4GHz Bluetooth Receiver Sensitivity | -96dBm |
| Transmit Power | Max -1.487dBm Operating Voltage | DC1.8~3.8V（Typ3.3V） |
| Sleep Current | ＜1uA(Typ) TX(@0dBm) | ＜6.1mA(Typ) |
| RX | ＜5.9mA Communication Distance | 100m@0dBm |
| Operating Temperature | -20℃~+70℃ Protection Level | IP67 |
| Size | Φ47mm×27mm Weihgt | 43g |
| Standby Time | ＞4 Years @0dBm Deployment Method | 3M glue sticking & Screw fixing |
Typical Application
- Smart business district application solutions
- Smart factory application solutions
- Smart Tourism Solution
- Museums and attractions solutions
- Parking lot solutions
- Solutions for hospitals and government agencies
FCCCaution\
This device complies with part 15oftheFCCRules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and(2) this device must accept any interference received,including interference that may cause undesired operation. any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part15of the FCCRules. These limits are designed to provide reasonable protection against harmful interference in residential installation.
- Reorient or relocate the receiving antenna.
- Increasetheseparationbetweentheequipment and receiver.
- Connect the equipment into an anoutletonacircuitdifferent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/tv technician for help.
This equipmentcomplieswithFCC radiation exposure limits set Fortran’s uncontrolled environment.
