Kramer Kwc-musb Receiver For Micro-usb Connector Instruction Manual

KRAMER KWC-MUSB Receiver for Micro-USB Connector

Installation Instructions 

MODELS:

• KWC-MUSB Receiver for Micro-USB Connector
• KWC-LTN Receiver for Lightning Connector

SAFETY WARNING
Disconnect the unit from the power supply before opening and servicing

For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to these installation instructions may be found.
We welcome your questions, comments, and feedback.
www.kramerAV.com
[email protected]

KWC-MUSB Receiver for Micro-USB Connector and KWC-LTN Receiver for Lightning Connector

Congratulations on purchasing your Kramer KWC-MUSB and KWC-LTN wireless charging receivers. You can use the receivers with the Kramer Wireless Charging (KWC) products.

NOTE: These receivers are used for mobile devices that DO NOT have a built-in wireless charging receiver.
Mobile devices with a built-in wireless receiver, compliant with the Qi standard, can be placed directly on the charging spot.

Using the Wireless Charger

To use the Kramer receivers:

1. Connect your mobile device to either the KWC-MUSB Receiver for Micro-USB Connector or the KWC-LTN Receiver for Lightning Connector, as required.
2. Place the mobile device with the attached receiver centered on the charging spot (correct side facing the charging spot, see Figure 3) until it’s fully charged.

WARNING:

1. You can only charge one mobile device via the charging spot at a time.
2. When charging a mobile device, do not place any metal or magnetic objects over the receiver.
3. Charging a mobile device using the receiver in the vicinity of pacemakers, hearing aids, or similar medical electronic devices may interfere with the function of these devices.
4. Make sure the receivers are used in a cool and well-ventilated environment and away from flammable and explosive objects.
5. Avoid using the receivers in extreme temperatures or high humidity.

Specifications

WARRANTY