Laxihub P2 1080P WiFi Home Security Camera 
Packing list
Packing list
Product description
- LED indicator
- Microphone
- Speaker
- Reset button
- DC5V USB port
- Micro SD card slot
Notice
The camera beeps when the operation is completed.
To reset the device, press and hold the reset button for 5 seconds.
| Flashing red light (slow) | Waiting configuration |
| Flashing red light (fast) | Searching WiFi network |
| Fixed blue light | Camera connected to WiFi |
| Flashing blue light | Access point mode |
Installation
- Use the included mounting bracket to fix the camera to a clean surface.
- Or, put the camera on a flat surface.
Camera configuration
Step 1 Turn on your camera by plugging in the power adaptor.
Step 2 Connect your smartphone to the Wi-Fi network.
Step 3 Download Arenti app from the App Store or Google Play depending on your device.
Step 4 Launch Arenti app and sign up for the first use.
Step 5 Follow the steps below to add your camera, then follow the on-screen instructions.
For more information, scan the QR code below. 
Note
- If you have multiple cameras, please follow step 5 again to add devices one by one.
- To change Wi-Fi network, please restore the camera to factory settings and follow step 5 to add the camera.
Specifications
Support
www.laxihub.com
Direct current (DC)
Don’t throw batteries or out-of-order products with the household waste (garbage). The dangerous Substances that they are likely to include may harm health or the environment. Make your retailer take back these products or use the selective collection of garbage proposed by your city.
Hereby, laxihub, declares that the radio equipment type ‘ P2’ is in compliance with the Directive 2014/53/EU.
The full test of the EU declaration of conformity is available at the following Internet address: http://www.laxihub.com
For indoor use only
