MOUNT-VP08DP Universal Drop Ceiling Height Adjustable Projector Mount
Product Information
- Product Name: White Extending Universal Drop Ceiling Projector
Mount - SKU: MOUNT-VP08DP
- Weight Capacity: 29.7 lbs (13.5 kg)
The package includes the following items:
- (x1) Mount (A)
- (x1) Bracket (B)
- (x1) Mount Arms (C)
- (x1) Ceiling Plate (D)
- (x2) Clip (E)
- (x1) Y-Cable with Lock (F)
- (x2) M6x18mm Screw (S-A)
- (x2) M6 Washer (S-B)
- (x6) M5x12mm Screw (S-C)
- (x6) Small M5 Washer (S-D)
- (x6) Plastic M5 Washer (S-E)
- (x2) Plastic Spacer (S-F)
- (x2) Threaded Plate (S-G)
- (x4) M3x8mm Screw (M-A)
- (x4) M4x10mm Screw (M-B)
- (x4) M5x10mm Screw (M-C)
- (x4) M6x10mm Screw (M-D)
- (x4) M3 Washer (M-E)
- (x4) M4 Washer (M-F)
- (x4) M5 Washer (M-G)
- (x4) M6 Washer (M-H)
- (x1) 4mm Allen Wrench (T-A)
- (x1) 5mm Allen Wrench (T-B)
Tools needed for assembly:
- Drill
- Phillips Screwdriver
Product Usage Instructions
- Remove plastic plug from Ceiling Plate (D).
- Insert 2 toggles at end of Y-Cable with Lock (F) into 2 of the
16 slots on the top of the Ceiling Plate (D), making sure the slots
chosen will provide optimal support for the mount with projector.
Place Ceiling Plate into suspended-ceiling grid. Thread end of
cable through the side hole in the lock in the direction of the
arrow, wrap cable around beam or other support, then insert cable
down through center hole in lock and pull down to secure. - Push Clips (E) down over drop ceiling T-bar to hold the Ceiling
Plate (D) down. - Insert cables through side of Mount (A) if cables will be
exposed below ceiling. Insert cables through center of Mount (A) if
cables will be hidden above ceiling. - Secure Mount (A) to Ceiling Plate (D) using M6x18mm Bolts (S-A)
with M6 Washers (S-B), and tighten with 5mm Allen Wrench
(T-B). - Secure Bracket (B) to Mount (A) using Threaded Plate (S-G),
Plastic Spacer (S-F), M5x12mm Screws (S-C), Small M5 Washer (S-D),
Plastic M5 Washer (S-E), and 4mm Allen Wrench (T-A). - Align Mount Arms (C) with mounting holes in projector, and
mount to projector using screws (M-A thru M-D), Washers (M-E thru
M-H) most appropriate for your projector and a Phillips
Screwdriver. If your projector has 3 mounting holes, simply remove
one of the arms. For mini projectors with a single hole, remove all
arms and mount projector directly to Bracket. - Angle Mount Arms (C) with Projector and hook onto Assembled
Mount to partially secure. Secure Mount Arms (C) to Assembled Mount
using M5 Plastic Washer (S-E), M5 Washer (S-D), M5x12mm Screw (S-C)
and 4mm Allen Wrench (T-A).
White Extending Universal Drop Ceiling Projector Mount
Instruction Manual
SKU: MOUNT-VP08DP
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/mount-vp08dp
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
www.vivo-us.com Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A (x1) Mount
B (x1) Bracket
C (x1) Mount Arms
D (x1) Ceiling Plate
E (x2) Clip
F (x1) Y-Cable with
Lock
S-A (x2) M6x18mm
Screw
S-B (x2) M6 Washer
S-C (x6) M5x12mm
Screw
S-D (x6) Small M5 Washer
S-E (x6) Plastic M5
Washer
S-F (x2) Plastic Spacer
S-G (x2) Threaded
Plate
M-A (x4) M3x8mm
Screw
M-B (x4) M4x10mm
Screw
M-C (x4) M5x10mm
Screw
M-D (x4) M6x10mm
Screw
M-E (x4) M3 Washer
M-F (x4) M4 Washer
M-G (x4) M5 Washer
M-H (x4) M6 Washer
T-A (x1) 4mm Allen
Wrench
T-B (x1) 5mm Allen
Wrench
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
Alternative mounting hardware (if drop ceiling panel is not used)
W-A (x4) ST6x56mm Screw
W-B (x4) Concrete Anchor
W-C (x4) M6 OD-16 Washer
2
TOOLS NEEDED
Drill
Phillips
Screwdriver
DO NOT EXCEED WEIGHT CAPACITY.
29.7 lbs
Failure to do so may result in serious injury.
(13.5 kg)
ASSEMBLY STEPS
STEP 1
Remove plastic plug from Ceiling Plate (D).
D
STEP 2
Insert 2 toggles at end of Y-Cable with Lock (F) into 2 of the 16 slots on the top of the Ceiling Plate (D), making sure the slots chosen will provide optimal support for the mount with projector. Place Ceiling Plate into suspended-ceiling grid. Thread end of cable through the side hole in the lock in the direction of the arrow, wrap cable around beam or other support, then insert cable down through center hole in lock and pull down to secure.
F D
3
STEP 3
Push Clips (E) down over drop ceiling T-bar to hold the Ceiling Plate (D) down. E D T-Bar
STEP 4
OPTION A: Insert cables through side of Mount (A) if cables will be exposed below ceiling. A
OPTION B: Insert cables through center of Mount (A) if cables will be hidden above ceiling. A
4
STEP 5
Secure Mount (A) to Ceiling Plate (D) using M6x18mm Bolts (S-A) with M6 Washers (S-B), and tighten with 5mm Allen Wrench (T-B).
D
S-B S-A T-B A
STEP 6
Secure Bracket (B) to Mount (A) using Threaded Plate (S-G), Plastic Spacer (S-F), M5x12mm Screws (S-C), Small M5 Washer (S-D), Plastic M5 Washer (S-E), and 4mm Allen Wrench (T-A).
S-D S-C S-E
A
S-G
T-A
S-F
B
5
STEP 7
Align Mount Arms (C) with mounting holes in projector, and mount to projector using screws (M-A thru M-D), Washers (M-E thru M-H) most appropriate for your projector and a Phillips Screwdriver. NOTE: If your projector has 3 mounting holes, simply remove one of the arms. For mini projectors with a single hole, remove all arms and mount projector directly to Bracket.
M-A/M-B/M-C/M-D M-E/M-F/M-G/M-H
C
STEP 8
Angle Mount Arms (C) with Projector and hook onto Assembled Mount to partially secure. Secure Mount Arms (C) to Assembled Mount using M5 Plastic Washer (S-E), M5 Washer (S-D), M5x12mm Screw (S-C) and 4mm Allen Wrench (T-A).
S-D S-C
S-E C
T-A
6
STEP 9
Adjust angle and rotation of projector if desired by loosening screws on Assembled Mount using 4mm Allen Wrench (T-A).
T-A
7
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED: 08/01/2022 REV1.1
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
AVG. RESPONSE TIME (within office hrs): 1HR 8M – 23% within < 15m – 38% within < 30m – 61% within < 1hr – 83% within < 2hr – 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Register a .US.COM domain today!
VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
White Universal Drop Ceiling Height Adjustable Projector Mount – VIVO - desk solutions, screen mounting, and more
