4167101-848 Greenwich 1-Light Wall Sconce
Product Information: Greenwich Wall
The Greenwich Wall is a fixture that is intended to be installed
utilizing NEC compliant junction boxes. This product is safety
listed for damp locations. The fixture comes with a mounting plate,
fixture base, candle tube, socket, lamp, fixture screw, and an
optional shade.
CAUTION – RISK OF FIRE: This product must be installed in
accordance with the applicable installation code by a person
familiar with the construction and operation of the product and the
hazards involved. Save these instructions!
Manufacturer Information:
Generation Lighting
7400 Linder Ave., Skokie, IL 60077
T 847.410.4400 | F 847.410.4500
www.generationlighting.com
Product Usage Instructions
- Secure the mounting plate to the junction box or wall.
- Connect the fixture to a suitable ground in accordance with
local electrical codes. - Connect the white fixture wire to the neutral power line wire
with a wire nut. - Connect the black fixture wire to the hot power line wire with
a wire nut. - Neatly place the wires into the junction box, place the fixture
onto the mounting plate, and secure it in place using the fixture
screws. - Install the candle tube by sliding it over the socket.
- Screw the lamp into the socket. Refer to the label on the
socket for Max Wattage Information. - Optional: If installing the shade, place it over the lamp.
Note: Always follow local electrical codes and consult a
professional if you are not familiar with electrical
installation.
Installation Instructions for
Greenwich Wall
WALL
GREENWICH_WALL
4167101 1.0
GENERAL PRODUCT INFORMATION:
These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for damp locations. This instruction shows a typical installation.
CAUTION – RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
Use minimum 90°c supply conductors.
SAVE THESE INSTRUCTIONS!
©2022 Visual Comfort & Co., L.L.C. All rights reserved. The Visual Comfort & Co. logo is a registered trademark of Visual Comfort & Co. Visual Comfort & Co. reserves the right to change specifications for product improvements without notification.
7400 Linder Ave., Skokie, IL 60077 T 847.410.4400 | F 847.410.4500
www.generationlighting.com
Install the Fixture
1A
SHADE
8
LAMP
7
JUNCTION BOX
MOUNTING PLATE
3
2
FIXTURE BASE
5
CANDLE TUBE
6 SOCKET
4
5
FIXTURE SCREW
1 Secure the mounting plate to the junction box or wall. 2 Connect the fixture to a suitable ground in accordance with local electrical codes. 3 Connect the white fixture wire to the neutral power line wire with a wire nut. 4 Connect the black fixture wire to the hot power line wire with a wire nut. 5 Neatly place the wires into the junction box, place the fixture onto the mounting plate, and secure it in place using the
fixture screws 6 Install the candle tube by sliding it over the socket. 7 Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information. 8 Optional: If installing the shade, place it over the lamp.
2
Generation Lighting - Our Collections
