4461604-848 Clybourn Wall Sconce
Product Information:
The Clybourn Wall is a fixture that is designed to be installed
using NEC compliant junction boxes. It is safety listed for damp
locations, making it suitable for use in areas with high humidity
or moisture. The installation instructions provided are for typical
installation, and it is important to follow them to ensure the
safety of the product. The product comes with a mounting plate,
shade, lamp socket, and cap nuts.
Product Usage Instructions:
- Secure the mounting plate to the junction box or wall.
- Connect the fixture to a suitable ground in accordance with
local electrical codes. - Connect the white fixture wire to the neutral power line wire
with a wire nut. - Connect the black fixture wire to the hot power line wire with
a wire nut. - Neatly place the wires into the junction box, place the fixture
onto the mounting studs, and secure it in place by screwing the cap
nuts onto the studs. - Install the lamp(s) by inserting them completely into the
socket holes. Refer to the label on the socket for Max Wattage
Information. - Screw the shade onto the socket threads. Repeat for remaining
shades.
Note: It is important to follow the instructions carefully and
ensure that the fixture is installed by a person familiar with the
construction and operation of the product and the hazards involved.
Also, make sure to save these instructions for future
reference.
Installation Instructions for
Clybourn Wall
WALL
CLYBOURN_WALL
4161601, 4461602, 4461603, 4461604 1.0
GENERAL PRODUCT INFORMATION:
These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for damp locations. This instruction shows a typical installation.
CAUTION – RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
Use minimum 90°c supply conductors.
SAVE THESE INSTRUCTIONS!
©2022 Visual Comfort & Co., L.L.C. All rights reserved. The Visual Comfort & Co. logo is a registered trademark of Visual Comfort & Co. Visual Comfort & Co. reserves the right to change specifications for product improvements without notification.
7400 Linder Ave., Skokie, IL 60077 T 847.410.4400 | F 847.410.4500
www.generationlighting.com
Install the Fixture
1A
JUNCTION BOX
MOUNTING PLATE
3
5 2
5
4
MOUNTING
CAP
STUD
NUT
SHADE
LAMP
SOCKET SHADE BASE
1 Secure the mounting plate to the junction box or wall. 2 Connect the fixture to a suitable ground in accordance with local electrical codes. 3 Connect the white fixture wire to the neutral power line wire with a wire nut. 4 Connect the black fixture wire to the hot power line wire with a wire nut. 5 Neatly place the wires into the junction box, place the fixture onto the mounting studs, and secure it in place by screwing
the cap nuts onto the studs. 6 Install the lamp(s) by inserting them completely into the socket holes. Refer to the label on the socket for Max Wattage
Information. 7 Screw the shade onto the socket threads. Repeat for remaining shades.
2
Generation Lighting - Our Collections
