LPP-20722-3 Light Dimmable Drum Chandelier
Product Information
The product with ITEM NO.: LPP-20722-3 is an assembly-required
item. It is designed to be assembled into a finished product that
can be used for its intended purpose.
Specifications
- Model: LPP-20722-3
- Assembly Required: Yes
- Dimensions: [insert dimensions]
- Weight: [insert weight]
- Material: [insert material]
Product Usage Instructions
Before assembling the product, please ensure that all parts and
hardware are included in the package. Refer to the parts list in
the manual and verify that each part is present.
To assemble the product, follow these steps:
- Arrange all the parts in a clear workspace.
- Follow the step-by-step instructions provided in the
manual. - Use the hardware provided in the package to secure each part in
place. - Once all the parts are assembled, verify that each part is
securely attached and all connections are tight. - Test the product to ensure it is functioning properly.
If you encounter any issues during assembly or have any
questions about using the product, please refer to the
troubleshooting section of the manual or contact customer support
for assistance.
ASSEMBLY INSTRUCTIONS ITEM NO.: LPP-20722-3
B A C (C1,C2,C3) F D E Use 60Wx3 Max type B10/T8 BULB (Bulb not included) 1. Carefully unpack and identify all parts referring to illustration for parts identification. 2. Turn the power to the installation point OFF. 3. Align one end of the hole of frame (C1) with one end of screw at frame (C2), securing with small finial (F). Repeat the process for remaining frame (C2), (C3) as shown in the diagram. 4. Unravel the supply power and ground wires and pass them through the center holes of short stem (B), shade (C), long stem (D) and loop (E). 5. Thread the short stem (B) onto the protruding nipple of the socket assembly (A). 6. Carefully place shade (C) onto the nipple of the short stem (B), securing with long stem (D). Hand tighten until snug. 7. Install the loop (E) to the long stem (D). 8. Referring to the installation instruction with the product for the wiring and installation. 9. Install proper bulbs (not provided) to the sockets referring to the marking and/or labels on the fixture for maximum wattage. 10. Restore the power to the installation point ON. 11. Assembly is completely. Retain this sheet for future reference.
