Jonard Tools Mds-100 Microduct Sheath Slitting Tool Instruction Manual

JONARD TOOLS MDS-100 Microduct Sheath Slitting Tool Instruction Manual

INSTALLATION INSTRUCTION

1. Start slitting at the end of your microduct.
   
2. Stop slitting M when needed.
   
3. Do not lift up the MDS-100 while in microduct! NOTE: Keep tool handle down to reduce stress  on slitting guides.
   
4. Back out the MDS-100 to the end of the sheathe and remove it.
   

Costumer Support

Tel 914.793.0700
Fax 914.793.4527
jonard.com