2FT-3FT Slim Floating Shelf
Product Information:
The Shelf 2FT/3FT is a slim floating shelf designed for stylish
and space-saving storage. It comes in two sizes: 23 5/8 inches
(600mm) and 35 1/2 inches (900mm). The shelf has alternative hole
positions that allow for sideways placement options. It is
recommended to select holes in the shelf that match the stud
distances, which are usually 16 inches. The shelf is designed for
hollow-wall assembly.
Parts:
- A x1 – Floating Shelf
- B x2 – Hollow-Wall Invisibolt
Tools Required:
- 1/4 Wrench (6.35mm)
- Hand Drill
- 5/8 (15mm) Bit
- Level
Important Safety Note:
Beware of drilling into electrical wire or pipes within the
wall!
Maximum Weight Capacity:
The maximum weight that can be safely placed on the properly
installed shelf is 33lbs (15 KGS), evenly distributed.
Product Usage Instructions:
- Use the actual shelf back to determine and mark where the
mounting holes need to be drilled. - Use a spirit level to ensure that the shelf will be
horizontal. - Drill a 5/8 (15mm) hole. Hold the metal channel alongside the
plastic straps and slide the channel through the hole. Ensure there
is a minimum clearance of only 1-7/8 behind the wall. - Hold the ends of the straps together between your thumb and
forefinger, and pull them toward you until the channel rests behind
the wall. Use your other hand to ratchet the cap along the straps
until the flange of the cap is flush with the wall. - Place your thumb between the straps at the wall. Push your
thumb side to side, snapping off the straps level with the flange
of the cap. - Insert an Invisibolt bolt through a white flat washer and
tighten it until snug, then stop. Use a wrench to tighten it
securely. Be careful when finding the thread and inserting the
Invisibolt with too much force, as it can push the channel through
the wall. - Attach the shelves onto the brackets, pressing them completely
against the wall.
Important Note: The holes on the shelf are for
positioning and not for additional reinforcement. Do not allow
children to play or hang from the shelf.
For any further assistance or inquiries, please refer to the
product manual or contact our customer support at 102722.
SHELF 2FT/3FT
23 5/8″ (600mm) / 35 1/2″ (900mm)
Slim Floating
Shelf
16″ (406.5mm) 16″ (406.5mm)
Alternative hole positions allow for sideways shelf placement options. Select holes in shelf to match stud distances (usually 16″).
Hollow-Wall Assembly instructions (24″/36″)
Parts
A x1 — Floating Shelf B x2 — Hollow-Wall Invisibolt
Tools Required
1/4″ Wrench (6.35mm) Hand Drill 5/8″(15mm) Bit Level
A B
Cap
1
Use actual shelf back to determine and mark where mounting holes need to be drilled. Use spirit level to ensure shelf will be horizontal.
2 Drill 5/8″ (15mm) hole. Hold metal channel alongside plastic straps & slide
channel through the hole. Minimum clearance behind wall: only 1-7/8″.
IMPORTANT SAFETY NOTE
Beware of drilling into electrical wire or pipes within wall!
1
2
3 Hold the ends of straps together between thumb & forefinger and pull toward
you until channel rests behind wall. Ratchet cap along straps with other hand until flange of cap is flush with wall.
4 Place thumb between straps at wall. Push thumb side to side, snapping off
straps level with flange of cap.
3
4
5
Insert Invisibolt bolt through white flat washer and tighten until snug, then stop. Use wrench to tighten securely. Be careful when finding the thread, inserting
the Invisibolt with too much force can push the channel through the wall.
6 Attach shelves onto brackets, pressing completely against the wall.
IMPORTANT NOTE
Holes are for positioning, not additional reinfocement.
WALLBOARD
90º 90º
90º
SECURE INVISIBOLTTM 90º TO WALL
90º
WARNING
Do not allow children to play or hang from shelf
Maximum weight on properly installed shelf is 33lbs, 15 KGS evenly distributed.
102722
