SENNHEISER TVC2-EB TV Clear Earbuds
Product Information
The Sennheiser TV Clear Earbuds 2 / TVS 200 Earbuds, TV Clear Transmitter is a wireless audio system designed for use with televisions. The system operates on a specific frequency band and has a transmit power that complies with regulations in various countries/regions.
Product Frequency Band
The Sennheiser TV Clear Earbuds 2 / TVS 200 Earbuds, TV Clear Transmitter operates on a specific frequency band. Please refer to the product manual for information on the frequency band used in your region.
Transmit Power
The system has a transmit power that complies with regulations in various countries/regions. Please refer to the product manual for information on the transmit power used in your region.
Product Usage Instructions
- Insert the earbuds into your ears and adjust them for comfort.
- Connect the TV Clear Transmitter to your television using the provided cable.
- Turn on the TV Clear Transmitter and ensure that it is properly connected to your television.
- Turn on the earbuds and ensure that they are properly paired with the TV Clear Transmitter.
- Adjust the volume on both the earbuds and your television to a comfortable level.
- Enjoy wireless audio from your television through the Sennheiser TV Clear Earbuds 2 / TVS 200 Earbuds.
Note: For detailed instructions on pairing the earbuds with the TV Clear Transmitter, please refer to the product manual.
Compliance Information
Sennheiser TV Clear Earbuds 2/ TVS 200 Earbuds, TV Clear Transmitter
- Frequency band: 2400 – 2483.5 MHz / 111 – 147 kHz
- Transmit power: <10 mW
| Country/Region | Earbuds Model: TVC2-EB | Charging case Model: TVC2-C | Transmitter Model: TVC2-TX |
| USA |  | ||
| FCC ID: 2A3ULTVC2EB | FCC ID: 2A3ULTVC2C | FCC ID: 2A3ULTVC2TX | |
| Canada |  CAN ICES3(B)/NMB3(B) | ||
| IC: 28115-TVC2EB | IC: 28115-TVC2C | IC: 28115-TVC2TX | |
| Europe | 
| 
| |
| United Kingdom |  |
| |
| Australia |  | ||
| New Zealand | R-NZ | ||
| Vietnam | Sonova Consumer Hearing Gmb. | ||
| Russia |  | ||
| Japan |  R xxx-xxxxxx | – | R xxx-xxxxxx |
| Singapore | Complies with IMDA Standards DB100582 | Complies with IMDA Standards DB100582 | |
| Greater China |  | ||
| CMIIT ID: xxxxxx | – | CMIIT ID: xxxxxx | |
 CCAI22Lxxxxxx | CCAI22LPxxxxx | CCAI22LPxxxxxx |
| South Korea |  R-R-S4s-MTW3 Sonova Consumer Hearing GmbHSonova Consumer Hearing GmbH | Battery: XU100883-20013A |
– |
FCC STATEMENT
FCC Supplier’s Declaration of Conformity (SDoC)
We,
- Sonova Consumer Hearing USA, LLC
- One Enterprise Drive Old Lyme
- CT 06371 USA
- Tel: +1 (860) 598-7800
The declare the above device complies with the requirements of Federal Communications Commission. This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Responsible Party: Lou deLaforcade
This device complies with Part 15 of the FCC Rules and with Industry Canada‘s license-exempt RSSs. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
The device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and ICES-003 of Industry Canada. These limits are designed to provide reasonable protection against harmful interference in a residential installation. The device generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
China RoHS
| (Part Name) | Harmful Substance | |||||
| (Pb) | (Hg) | (Cd) | (CrVI) | (PBB) | (PBDE) | |
| (Circuit Modules) | x | o | o | o | o | o |
This form is prepared according to the provisions of SJ/T 11364.
- o: Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirement specified in GB/T 26572.
- x: Indicates that the content of the hazardous substance in at least one homogeneous material of the part exceeds the limit requirement specified in GB/T 26572.
Sonova Consumer Hearing GmbH
- Am Labor 1, 30900 Wedemark, Germany
- www.sennheiser-hearing.com
Official website and online shop | Sennheiser
