151222 One Coat Fence Life Medium Oak 9Ltr
Product Information:
The Ronseal Sprayable Fence Life is a product that is designed
to be used for painting and protecting wooden fences. It is a quick
and easy way to apply the paint to the fence, without having to use
a brush or roller. The product comes in a container that can be
used with a sprayer, making it easy to apply the paint evenly to
the fence. The Fence Life is available in a range of colors to suit
your preferences.
Product Usage Instructions:
- Before using the Ronseal Sprayable Fence Life, make sure to
give it a good shake and stir, as this is normally the only
preparation required. - If the Fence Life has thickened up due to storage or cold
temperatures, it’s best to leave it out in the sun or somewhere
warm before pouring it into the sprayer. If it still looks thick,
add some warm water, but do not dilute it more than 10%. Then give
it another good stir. - If you have already tried spraying and it’s not coming out,
check point 2 above. Clean the filters in the handle and nozzle
before trying to spray it again. - Once the Fence Life is ready, pour it into the sprayer and make
sure that all parts are securely attached. Test the sprayer on a
small area first, to ensure that the paint is being applied evenly
and there are no blockages. - Start spraying from the top of the fence and work your way
down. Use even strokes and keep the sprayer at a consistent
distance from the fence. Avoid spraying in windy conditions or when
rain is forecasted. - Allow the first coat to dry before applying a second coat if
necessary. Follow the drying times on the product label. - Clean the sprayer thoroughly after use, following the
manufacturer’s instructions.
Additional User Instructions
How to prepare your Fence Life for Spraying
1. Give your Ronseal Sprayable Fence Life a good shake and a stir, this is normally the only prep you need
2. Fence Life can thicken up when in storage and when it gets cold. It’s best to leave it out in the sun or somewhere warm before pouring it into your sprayer. If it looks really thick, add a bit of warm water. Don’t dilute it more than 10%. Then give it another good stir.
If you`ve already tried spraying and it’s not coming out, check point 2 above. Clean the filters in the handle and
nozzle before trying to spray it again


















