HODT13D Outdoor Light Sensor Timer
Product Information
The Outdoor Light Sensor Timer, model HODT13D, is a device
designed to control outdoor lighting based on time and ambient
light conditions. It features a timer dial that allows you to set
the lighting duration from 2 to 8 hours or activate the dusk to
dawn function for automatic operation. The built-in sensor detects
the ambient light level and turns the timer on at dusk and off at
dawn. The power indicator light indicates whether the timer is
turned on or off.
The timer must be mounted in a vertical position with the
receptacle facing downward and at least 2FT above ground level. It
has a maximum power rating of 125V, 60Hz, and can handle up to
1875W or 15A resistance. The cord provided is 12FT long and made of
SJTW 14/3 AWG material.
The product comes with a one-year limited warranty, supported by
a professional R&D team and QC team. The warranty covers
materials and workmanship from the purchase date. However, it does
not cover damage caused by personal misuse or improper
installation.
Product Usage Instructions
- Mount the timer in a vertical position with the receptacle
facing downward and at least 2FT above ground level. - Ensure that the devices connected to the timer do not exceed
its maximum ratings. - Do not immerse the timer in water.
- Supervise children when using the timer.
- Do not attempt to disassemble or repair the product unless
authorized service personnel. - Always unplug the timer and store it indoors when not in
use. - To set the timer, turn the dial to the desired duration (2 to 8
hours) or the dusk to dawn function for automatic operation. - The sensor will detect the ambient light level and turn the
timer on at dusk and off at dawn. - Check the power indicator light to determine whether the timer
is turned on or off.
Please refer to the user manual for more detailed instructions
and safety precautions.
Outdoor Light Sensor Timer
HODT13D
Please pay attention to the warning signs Read the instructions with caution before operating
and keep it properly
V20718
WARNING : To reduce the risk of fire, electric shock or personal injury, please strictly follow the instructions.
1. The device must be mounted in a vertical position with the receptacle facing downward and with the receptacle at least 2FT above the ground level.
2. Do not connect any devices which exceed the maximum ratings of the timer.
3. Do not immerse in water. 4. Children are not allowed to use the timer without supervision. 5. Do not disassemble or repair the product, but only by authorized
service personnel. 6. Always unplug and store indoors when not in use.
Product Layout
1. Timer dial:2 to 8 hours or dusk
to dawn and daily repeat function.
2.Sensor:Sensor will turn timer on
1
at dusk and off at dawn.
3
2
3. Power:Power indicator light
indicates if the timer is turned on
or off.
Specifications:
Input Voltage: – 125V, 60Hz. Max Power Rating: – 125V, 60Hz, 1875W, – 15A Resistance, – 15A General Use, – 1000W Tungsten, – 500VA Electronic Ballast, – 120Vac, 60Hz, 8.3A Ballast, – 1/2HP. Cord: – 12FT SJTW 14/3 AWG.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
One Year Limited Warranty Supported by our professional R&D team and QC team, we provide One Year Warranty for materials and workmanship from the purchase date. Please note that the warranty does not cover damage caused by personal misuse or improper installation. Please attatch your Order ID and Name so that our dedicated customer service team can help you better.
3
