Sunmodo K10082-001 Ez Metal Roof Mount Kit Instructions

Product Information:

The EZ Metal Roof Mount Kit with L-Foot is a rooftop attachment
designed for mounting various equipment securely on metal roofs. It
includes one EZ Metal Roof Shoe with a thick EPDM gasket for a
water-tight seal, one Hex Cap, one EZ L-Foot, and all necessary
hardware for installation.

The kit is available in different variations:

• Part Number: K10082-001
• Description: EZ Metal Roof Mount Kit with L-Foot, Clear
• Part Number: K10082-BK1
• Description: EZ Metal Roof Mount Kit with L-Foot, Black
• Part Number: K10082-002
• Description: EZ Metal Roof Mount Kit with Tall L-Foot,
  Clear
• Part Number: K10082-BK2
• Description: EZ Metal Roof Mount Kit with Tall L-Foot,
  Black

The product is protected by U.S. Patent Number 8,136,311.

Product Usage Instructions:

Please follow the steps below to properly install the EZ Metal
Roof Mount Kit:

1. Carefully inspect the roof surface to ensure it is suitable for
   installation and free from any damage or defects.
2. Choose the appropriate kit variation based on your specific
   requirements (clear or black, with standard or tall L-Foot).
3. Position the EZ Metal Roof Shoe on the desired location of the
   metal roof, ensuring proper alignment and orientation.
4. Securely attach the EZ Metal Roof Shoe to the metal roof using
   the provided hardware. Make sure to tighten the fasteners
   adequately without over-tightening.
5. Place the equipment or device to be mounted onto the EZ L-Foot,
   ensuring proper alignment and stability.
6. Securely attach the equipment or device to the EZ L-Foot using
   the provided Hex Cap and fasteners. Again, ensure proper tightening
   without over-tightening.
7. Perform a final inspection of the installation to verify that
   all components are securely attached and properly sealed.

For additional assistance or information, please refer to the
complete user manual or contact our customer support.